Recommended Way to Fit Yakima Hullraiser to Aero Shaped Crossbars

Question

Question:

I am trying to convert a Yakima Hullraiser for use on my 2016 Subaru Forester with factory aerobars. When looking through the options I see the new Yakima universal mighty mounts but I couldnt tell if they are compatible with the Hullraiser. I also see the Hullraiser aero conversion kit. Which would be the better option and what parts would I need?

asked by: Adam

0

Expert Reply:

Since you have a Yakima Hullraiser and need to fit them on aero bars the best solution is the Hullraiser Aero kit part # Y8860031 as this is what Yakima recommends. The MightyMounts are a great solution for other racks that don't have specific convrersion kits, but for your application the Aero conversion kit is the way to go.

expert reply by: Jameson C

0

Answer 1

I attached a picture that has shows the installation instructions for the Yakima HullRaiser to HullRaiser Aero Conversion Kit #Y8860031. This will show you how to convert your Hullraiser to work on Aero bars.

view full answer...

Answer 2

The pads that are included with the #Y8860031 are designed to help prevent damage to your kayaks. If you don't use them I can't guarantee that your kayaks wouldn't get damaged. Your best option would be to order the plugs #Y8890058 so…

view full answer...

Answer 3

There are indeed instructions for the HullRaiser Aero that you can use to install conversion kit #Y8860031. I will send them to you in a separate email. Also I have included a picture showing how the parts all lay out together.

view full answer...

Answer 4

Yes, the Yakima HullRaiser to HullRaiser Aero Conversion Kit #Y8860031 that you referenced would easily fit crossbar widths of 2-3/8 inches.

view full answer...

Answer 5

I attached a picture that has shows the installation instructions for the Yakima HullRaiser to HullRaiser Aero Conversion Kit #Y8860031. This will show you how to convert your Hullraiser to work on Aero bars. You'll also need the part #Y8890057…

view full answer...

Answer 6

The Yakima HullRaiser to HullRaiser Aero Conversion Kit, Y8860031, is a Yakima product. The conversion will fit virtually all base rack cross bars, including factory cross bars. If you do not have crossbars going across your vehicle from driver side…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 12

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Recommended Way to Fit Yakima Hullraiser to Aero Shaped Crossbars

Product Page this Question was Asked From

Continue Researching