How Does Edge Evolution Programmer Turn Off Active Fuel Management

Question

Question:

how do i disable the ative fuel mangment on my edge programmer?? I have installed on a 08 chevy

asked by: Josh

0

Expert Reply:

The Edge Evolution Programmer part # EP85350 which replaced the number you listed can turn off the active fuel management of your 2008 Chevy Silverado. Press the home button and scroll down to settings. In that menu you'll see how to turn off the AFM.

expert reply by: Jameson C

0

Answer 1

I reached out to my contact at Edge and he said the Edge Gas Evolution CS2 Performance Tuner- Color Screen #EP85350 will give you the option to disable the AFM. When you get into the parameters of the tuner to change tire size, adjust speedometer,…

view full answer...

Answer 2

Yes, the Edge Gas Evolution CTS3 Performance Tuner part #EP39YR is compatible with your 2009 GMC Sierra that has the 5.3L V8 and will allow for you to disable the Active Fuel Management (AFM) system. We also have custom dash mounts available for…

view full answer...

Answer 3

On your Edge CTS2 programmer #EP85450 press the home button and scroll down to settings. Once you are in the settings menu you'll be able to scroll down and see the option for active fuel management. If you don't see this option you…

view full answer...

Answer 4

For your 2010 Chevy Avalanche with a 5.3 liter V8 we have the Edge Evolution #EP85350 that's a confirmed fit that can disable the AFM (active fuel management) system of your truck. It doesn't allow you to go in an manually adjust the…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

view full answer...

Answer 6

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to…

view full answer...

Answer 7

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 8

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 9

Replacement arms are available for the Roadmaster EZ5 Base Plate Kit #RM-521569-5 for your 2015 Honda Fit with the part #RM-ARMS. When the original base plate brackets and arms were manufactured, they were made as one part. To be sure that the new…

view full answer...

Answer 10

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 11

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 12

If you are installing just the Firestone Ride-Rite kit, #F2400, and not also adding an on-board air compressor such as #F2158, then I would estimate that it should take about 2 hours to install the kit. That is for someone with some mechanical…

view full answer...

How Does Edge Evolution Programmer Turn Off Active Fuel Management

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching