Does Malone Stacker Block Fit on Thule Aeroblade

Question

Question:

Does the malone stacker 8inch foam block fit the thule aeroblade?

asked by: Eric

0

Expert Reply:

Yes, the Foam Block for Malone Stacker Style Kayak Carriers # MPG168 that you referenced fit on Thule Aeroblade crossbars.

expert reply by: Jameson C

0

Answer 1

Yes, the Malone Foam Blocks for Kayaks will fit perfectly on Thule aero-style crossbars whether it's the older AeroBlade or the newer WingBar Evo. The Thule crossbars have standard dimensions that these foam blocks are meant to fit with. If you…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 4

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

The VIN sticker that comes with the Malone trailers like the Microsport part #MPG460G is supposed to be applied up near the coupler of the trailer on the frame. It comes as a separate decal though so it's up to you where to put it.

view full answer...

Answer 7

Yes, the Replacement Furrion Monitor Power Cable part #C-FOS07TAPK-006 can be obtained and will work with all of the Furrion Vision S Wireless RV Backup Camera Systems like part #FOS43TASF. The metal prongs on the side of the plug can wear out over…

view full answer...

Answer 8

The TracRac ladder racks have thicker crossbars which makes fitting a kayak carrier around the bars challenging but we do have a great option with the Rhino Rack carrier part #RR580 which fits into the top channels of the bars and gives you a saddle…

view full answer...

Answer 9

The angle of the arms that hold the flaps of the Rock Tamers Heavy-Duty, Adjustable Mud Flap System #ERT00108 are adjustable so that you can add distance between the tail pipe and them as needed. If you install the heat shield part #RT76FR that you…

view full answer...

Answer 10

I see that you got the Malone Foam Block for Kayaks #MPG158 in the past. These blocks are designed to be used with round, square, aero, elliptical, and most factory crossbars. But since you mentioned that the Malone Foam Block for Kayaks #MPG158 are…

view full answer...

Answer 11

Yes, the Malone Foam Block for Kayaks and Stand-Up Paddleboards part #MPG172 are compatible with the Yakima Round Crossbars.

view full answer...

Answer 12

The Malone Foam Block Kayak Carrier part #MPG172 that you referenced is a 24 inch long foam pad style kayak carrier from Malone like it sounds like you are looking for.

view full answer...