Recommended Trailer Hitch for 2012 MazdaSpeed 3
Question:
Im looking for a trailer hitch to mount on a 2012 Mazda Speed3 Im finding plenty on the regular Mazda 3 but want to make sure it will fit the Speed3 model
asked by: Nate W
Expert Reply:
The Curt Trailer Hitch Receiver # C11383 is a confirmed fit for the 2012 MazdaSPEED 3. I have included a link to the installation instructions for you and a link to a video showing a typical installation.
This hitch includes the hitch pin and clip. If you are doing some towing, you can use ball # 19256 (1-7/8 inch diameter) or # 19258 (2 inch diameter), to go with the recommended drawbar # 3594. For trailer wiring I recommend the 4 Pole Harness and Hardwire Kit, # C59236.
If you are going to be using the hitch for a bike rack or cargo carrier, the CURT warranty requires the use of a stabilization strap, # 18050, for extra support. Make sure that any accessory you add is compatible with a Class I trailer hitch. For bike racks, you will be limited to carrying 2 bikes maximum.
Products Referenced in This Question
Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories - 61" x 1" - Qty 1
- Accessories and Parts
- Hitch Bike Racks
- Hitch Cargo Carrier
- Tie Down Straps
- CURT
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Rise - 4 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Universal Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Is There an Adapter For Kids' Bikes For Hollywood Racks Trailer Rider Bike Rack
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What is a Draw Bar and Is It Needed to Install Trailer Hitch 24847
- Q&A: Comparing Curt and Draw Tite Hitches for 2018 Mazda 3
- Q&A: Differences Between Kuat Sherpa 2.0 and NV 2.0 Bike Racks
- Q&A: How To Properly Measure For A Rise And Drop On A Trailer
- Q&A: Draw-Tite Sportframe Hitch # 24857 Recommendation for a 2011 BMW 328i Sedan
- Q&A: How to Confirm Towing Capacity of Mazda 3
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: Best Bike Racks for Electric Bikes
- Article: Trailer Hitch Receiver Sizes
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Article: How to Choose a Bike Rack for a Sedan or Hatchback
- Article: Determining Trailer Tongue Weight