What Size Pin Hole Does the Replacement 2 Receiver Part # C45802 Use
Question:
What is the diameter of the 2 holes that attach this vertically and are adjustable on the shank?
asked by: Richard
Expert Reply:
The two holes that are used on part # C45802 to attach to an adjustable shank like part # 17120 are 5/8" in diameter which is the standard for 2" receiver tubes. You can use two of part # C21500 to attach it to the shank. It can be adjusted upward and downward on the shank depending on your specific needs. The complete unit with the shank, receiver, hitch balls, and hitch pin is part # D900 which I have attached a review video of for you.
Products Referenced in This Question
Curt Weight Distribution Shank - 10" Long - 5-3/4" or 6-1/8" Drop - 1,500 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- Fits 2 Inch Hitch
- Round - 6 Inch Drop
- Trunnion - 5 Inch Drop
- Round - 10 Inch Rise
- Trunnion - 9 Inch Rise
- CURT
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-3/16" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 3-3/16 Inch Span
- CURT
more information >
Curt Multi-Ball Adjustable Ball Mount for 2" Trailer Hitches
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- 2-5/16 Inch Ball
- Three Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 6 Inch
- Rise - 4 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- Class IV
- Long Shank
- CURT
more information >
Product Page this Question was Asked From
Replacement 2" Receiver for Curt Multi-Ball Adjustable Ball Mount
- Accessories and Parts
- Drop Hitch
- Trailer Hitch Ball Mount
- Receiver Tube
- CURT
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Flange Width and Hitch Pin Dimensions for Curt Rebellion XD Adjustable Ball Mount
- Q&A: Mounting Hole Dimensions of Replacement 10K Ball Mount Tongue for Brophy Adjustable Drop Hitch
- Q&A: Is it Still Necessary to Be Within 3" of Level When Flat Towing if You Have an All Terrain Tow Bar
- Q&A: Safety Cable Recommendation for Roadmaster Blackhawk Tow Bar
- Q&A: Recommended Ball Mount for Use w/ a Trailer that has a Lunette Ring
- Q&A: Maximum Speed Rating of kenda Loadstar # AM1ST92
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Weight Capacity of Blue Ox 12 Inch and 14 Inch Shanks
- Article: Ram Trailer Tow Prep Package
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Slipper Spring Trailer Suspension System Review
- Article: How (and Where) to Connect an RV Propane Grill
- Article: Trailer Wiring Diagrams