Overall Height of DeeZee Red Label Truck Bed Toolbox # DZ8537B with Lid Closed

Question

Question:

What is overall height with lid shut

asked by: Josh

1

Helpful Expert Reply:

With the lid closed on DeeZee Red Label Truck Bed Toolbox # DZ8537B the overall height is 16-9/10 inches. So I would just call that 17 inches.

expert reply by: Michael H

1

click to enlarge

Answer 1

To do a retractable tonneau cover for your 2016 RAM 3500 and use a tool box will require you do go with a box that will fit underneath the tonneau. The RetraxPRO part #RT80233 would be the cover that would work best for you as it is a fit for your…

view full answer...

Answer 2

Hey John, so the correct amount of spring bar tension will be based on the trailer's tongue weight and how it affects the suspension of your Nissan Frontier. Every WD system is a little different but what it comes down to typically is…

view full answer...

Answer 3

Yes, the best option we can offer you to add fuel capacity is with the DeeZee Truck Bed Auxiliary Tank part #DZ91752X which should fit in the space you have between the cab and 5th wheel hitch no problem as it is only 9" deep. I don't have…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

I got some information from Yakima and included a diagram of the EXO SwingBase #Y34VR, which is the base part for the EXO SwingBase 2 Tier #Y82VR. Though the measurement from the pin hole to the closest edge of the carrier is not included in said…

view full answer...

Answer 6

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 7

The Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers #AL88204 will fit with your lifted 2018 GMC Sierra 1500 but you might need to add a spacer kit if you had to lift the back of your truck. Since you didn't have…

view full answer...

Answer 8

The outside diameter of the Wire - Jacketed 6-Wire - per Foot #DW04906-1 is 1/2" including the vinyl jacket.

view full answer...

Answer 9

I have a great tool box option for your 2022 Ford F-250 that sits below the rails of your truck bed. The UWS Truck Bed Chest #UWS01048 is going to do a great job of wisely using the space in your truck bed while staying below the bed rails. It is…

view full answer...

Answer 10

You can install suspension enhancement on your 2016 Ram 1500 that has a 6 inch lift like the Air Lift LoadLifter 5000 Air Helper Springs #AL57365 (this is correct kit for your truck) but you do need the correct size spacer like you mentioned. The…

view full answer...

Answer 11

When it comes to adding The Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers - Rear Axle #AL88388 on your 2020 GMC Sierra 1500 The Air Lift Universal Air Spring Spacers for LoadLifter 5000 and 7500XL - 4 inch Lift -…

view full answer...

Answer 12

You'll want something pretty bright based on what you want it for so for maximum brightness out of an interior trailer light I would go with the part #ILL08COB. The raw lumen output rating is 1400 lumen. The effective lumen output rating is 990…

view full answer...

Overall Height of DeeZee Red Label Truck Bed Toolbox # DZ8537B with Lid Closed

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching