Recommended Bolt On Trailer Hitch Receiver with 1-1/4 Inch Opening for 2018 Subaru Crosstrek
Question:
I have a 2018 Subaru Crosstrek and Im looking for a 1.25 bolt on hitch. The ones you display mention not confirmed to fit. What does fit? Thanks
asked by: Robert W
Expert Reply:
The Draw-Tite Trailer Hitch Receiver - 1-1/4" # 36644 is a confirmed fit for your 2018 Subaru Crosstrek. It requires no drilling for installation and is an easy bolt on application.
If you will be doing light towing with this hitch, I recommend the Draw-Tite Ball mount # 36051 which comes with the pin and clip. Then you will need a hitch ball like # 19256 for a 1-7/8 inch diameter ball or # 19258 for a 2 inch ball.
For your trailer wiring harness, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118467 which plugs into your factory wiring in your rear cargo area. The connector will either be behind the driver's side trim panel or in the spare tire compartment.
Let me know if you have any other questions.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitches - 5/8" Rise, 1-1/4" Drop - 7" Long - 3.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 1 Inch
- Rise - 1 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 350 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Wiring Diagram for Bargman 7-Way RV Style Connector # WG54006-043
- Q&A: Picking Out Replacement Axle for Snowbear 550LHD Trailer
- Q&A: Will EcoHitch Stealth Fit 2023 Subaru Crosstrek Hybrid and Kuat NV 2.0 Bike Rack
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Replacement Keys and Lock Cores For a Rhino-Rack Zenith Rooftop Cargo Box
- Q&A: Comparing Curt and Draw Tite Class II Hitch That Fits 2024 Subaru Crosstrek
- Q&A: Trailer Hitch Receiver Fit For 2024 Subaru Crosstrek Wilderness
- Article: Trailer Wiring Diagrams
- Article: Best Camper Jacks
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Article: Determining Trailer Tongue Weight
- Article: Trailer Hitch Installation Tips
- Article: Rooftop Cargo Carriers