Curt Easy Mount Trailer Wiring Connector Recommendation for Class III 2 inch Hitch

Question

Question:

Will this fit on the draw-tite Class 3 hitch? What are the dimensions of this product?

asked by: Fernando

0

Expert Reply:

For a 2 inch hitch Class III hitch you'd want the Curt Easy Mount part # C58000 as the part # C58003 is for 2-1/2 inch hitches.

This measures 10 inches long and 3-1/4 inches tall.

expert reply by: Jameson C

0

Answer 1

Both of these are reliable brake controllers. Personally I like the freedom that the Curt Echo #C51180 gives you. You can use it on any vehicle with a properly wired 7-way and trailers with up to 2 braking axles. There is no wiring and it can be…

view full answer...

Answer 2

You can definitely still take calls on your smart phone while using the Curt Echo Brake Controller #C51180. However, depending on how your phone "loads" calls on the screen, it may be a little difficult to get to the manual override…

view full answer...

Answer 3

That's a good question Mark, and yeah I agree, it would make sense for the screws to be on the bottom when using the Gen-Y Anti-Rattle Clamp for 2-1/2" Hitch Receivers #GY28XR. It'll work either way, but they're on…

view full answer...

Answer 4

Yes! To add both anti-rattle and a lock to the Blue Ox Adjustable Ball Mount with Clamshell for 2-1/2" Hitch #BLU79XR you need the XL Anti-Rattle Trailer Hitch Receiver Lock for 2-1/2" Hitches #SHP2040-XL. This has a block insert with a…

view full answer...

Answer 5

Hey Mark, thanks for the question, and while we have exactly what you're looking for, it's actually a different part number (the one you mentioned is for a long bed). I went ahead and verified for you the correct SuperHitch for your 2018…

view full answer...

Answer 6

To add a hitch to your 2024 Honda Pilot, I recommend the etrailer item #e27KR. This hitch is custom fit and bolts to your Honda with included hardware. I really like the etrailer hitch item #e27KR because it installs behind your rear bumper cover and…

view full answer...

Answer 7

I do have a potential solution for you, but the Curt t-connector #C93FV will not fit your 2023 Kia Telluride SX model. As stated on our website, the #C93FV will only fit the LX and S models. The plug in your picture does appear to be a trailer wiring…

view full answer...

Answer 8

To add a hitch to your 2024 Kia Telluride, I recommend the Curt Trailer Hitch item #C13420. This hitch is custom fit and bolts to your Kia with included hardware. I really like this hitch because the crosstube mounts behind the rear bumper leaving…

view full answer...

Answer 9

You do not need anything else to install the Curt trailer wiring connector part #C93FV on your 2023 Kia Telluride S.

view full answer...

Answer 10

To flat tow your 2020 Ford Edge you will need "smart diodes" as included in the Roadmaster #RO44FR Universal Kit. However, I would go ahead and get the Roadmaster #RM38FR kit that additionally includes the 7-way to 6-way cable and…

view full answer...

Answer 11

The Curt Easy Mount Bracket #C58000 referenced in your question features an overall length of 10 inches and a height of 3-1/4 inches. I have attached an image with these and other relevant dimensions labeled that you can also check out. You will need…

view full answer...

Curt Easy Mount Trailer Wiring Connector Recommendation for Class III 2 inch Hitch

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching