Comparing Timbren and SuperSprings Jounce Spring Kits for 2017 Ram 1500

Question

Question:

Good afternoon, Please compare the TIMBREN v. SUMO

asked by: Mike F

0

Expert Reply:

The Timbren and Sumo rear-axle helper springs we offer for the 2017 Ram 1500, such as Timbren # TDR1500DQ and SuperSprings # SSR-307-47, both work the same way. They replace the factory bump stops with rubber (Timbren) or urethane foam (SuperSprings) jounce springs that, unlike those simple bump stops, provide progressive resistance when under load. As the load on them increases so too does their resistance. The factory bump stop is really just a fail safe, rather than an enhancement to ride quality.

Installation is slightly simpler with the Timbren kit and many more of our customers have shared their feedback on the performance of the Timbrens (more than a thousand opinions) as compared to the SuperSprings. The Timbren natural rubber springs are highly-rated and they cost less too.

Timbren rear-axle kit # TDR1500DQ fits both 2WD and 4WD trucks but does not fit the regular cab version nor trucks with the factory Air Suspension system. Generally the Timbren springs can handle more weight. The kit referenced provides load support for up to 8600-lbs, making it better for towing heavy cargo loads. Timbren also offers kit # TDR1500DS which is rated to 6000-lbs and which DOES fit the regular cab (without factory air suspension).

The choice really comes down to how much load support you need. If only moderate rear support for a trailer's tongue weight is the goal then the 1500-lb-rated SuperSprings # SSR-307-47, which also fits both 2WD and 4WD trucks - all cab types with or without factory air suspension - would be the better choice.

expert reply by: Adam R

0

Answer 1

For your 2020 Ram 1500 and how you plan to use your truck the best suspension enhancement is the SumoSprings Solo part #SSR-307-40. This kit is the better balance between ride quality and support than the Timbren you mentioned as well. Timbrens are…

view full answer...

Answer 2

Thanks for all that info it was definitely helpful, and we can get your 2016 Ram 1500 set up with the right SumoSprings. You are right about the SumoSprings being something that will help your truck, and between the 1,500 lb SumoSprings #SSR-307-47…

view full answer...

Answer 3

The SumoSprings Solo Custom Helper Springs item #SSR-307-47 have a 1500 lbs capacity whereas the SumoSprings Solo Custom Helper Springs item #SSR-307-40 have a 1,000 lbs capacity for lighter towing and hauling applications. Both are designed to offer…

view full answer...

Answer 4

If you're looking to help the suspension on your 2022 Ram 1500 absorb road shocks better you can for sure install a set of aftermarket jounce bumpers, like the SumoSprings Solo Custom Helper Springs #SSR-307-40. I like these springs over the…

view full answer...

Answer 5

There is certainly some give and take when adding suspension enhancements to a vehicle. The give being that you will sacrifice some of the ride quality while towing/loaded and the take being that you gain some of the suspensions strength back while…

view full answer...

Answer 6

The best option for SumoSprings for your 2022 Ram 1500 for towing a camper trailer are the 1,500 lb capacity springs, with the correct fit for your truck being the following: - SumoSprings Solo Custom Helper Springs #SSR-307-47 The reason why the…

view full answer...

Answer 7

I do have an option for a 2014 Ram 1500 but the SumoSprings Solo Custom Helper Springs part #SSR-307-40 won't do much for a lifted vehicle. Instead, I recommend the Timbren Rear Suspension Enhancement System part #TDR1500DQ which is really the…

view full answer...

Answer 8

The SumoSprings Solo Custom Helper Springs, #SSR-307-40 are rated at 1,000 lbs. and the #SSR-307-47 are rated at 1,500 lbs. These are a great products and improvements over the factory components however, because you state "...very close to…

view full answer...

Answer 9

We offer two SumoSprings options for your Ram 1500 Classic. For 1000 lbs of support, use the #SSR-307-40 kit you'd looked at. For up to 1500 lbs of support, use #SSR-307-47. Either kit is compatible with in-bed 5th wheel or gooseneck hitches. If…

view full answer...

Answer 10

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 11

If you are considering Timbrens like the #TDR1500DQ and the SumoSprings like the #SSR-307-47 for your 2022 Ram 1500 4x4, I recommend the SumoSprings #SSR-307-47. The SumoSprings will offer the same quality as the Timbrens in terms of suspension…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Comparing Timbren and SuperSprings Jounce Spring Kits for 2017 Ram 1500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching