Speed Rating for Kenda 5.30-12 Bias Trailer Tire # AM30780

Question

Question:

Kenda 5.30-12 Bias Trailer Tire with 12inch White Wheel - 4 on 4 - Load Range C Item # AM30780 What is the speed rating on this product?

asked by: Bob

0

Expert Reply:

Unless otherwise stated all trailer tires (including the # AM30780), are only rated to go 65 miles per hour as a maximum speed.

Check out the review video I attached for this wheel and tire as well as the help article I attached on trailer tires.

expert reply by: Jameson C

0

Answer 1

The tire and wheel combos we carry like the part #AM30780 are not machined balanced. You can have the tire and wheel combos balanced at a local tire shop if you wanted to. What some manufacturers will do is line up the light spot on the tire with the…

view full answer...

Answer 2

If you are in need of tires only, Kenda offers three different load ranges for a 5.3-12 trailer tire. The Load Range B tires, #AM10064, come with a maximum load rating of 840 pounds at 55 psi, Load Range C, #AM10066, with a maximum load rating of…

view full answer...

Answer 3

Trailer tires need to be inflated to the max psi rating listed on the tire sidewall. You will want to inflate them when cold. We don't carry the specific tire you have so we don't have the info, but it will be listed on the side of the…

view full answer...

Answer 4

The speed rating for the Kenda 4.80-12 Bias Trailer Tire with 12" Aluminum Wheel #AM30677 is 65 mph.

view full answer...

Answer 5

The difference in the overall diameters of the two tire sizes you listed is big enough that I would not recommend the use of a 5.3-12 tire in place of a ST175/80D13. The 5.3-12 will be 21.9 inches overall, whereas the ST175/80D13 measures 24.1…

view full answer...

Answer 6

I have linked you to our page with our selection of 5.30-12 tires with wheels that have a 4 on 4 bolt pattern; the prices of each is displayed on their respective product page. You can choose from either a load range C or load range B tire with…

view full answer...

Answer 7

Thanks so much for your pictures. From the looks of the photos, it looks like you have wheels with a bolt pattern of 4 on 4". To upgrade your tires to get the maximum capacity available on your 1,400 pound 4x8 trailer with 4.80-10 wheels, a…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 12

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Speed Rating for Kenda 5.30-12 Bias Trailer Tire # AM30780

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching