Replacement Mounting Hardware for Westin PRO TRAXX Oval Nerf Bars on 2009 Chevy Silverado

Question

Question:

Will these bracket mount bolt on to a 09 Silverado ext cab...I need 4inch oval nerf bar bracket pro traxx but they look a little different but not much

asked by: Miguel

0

Expert Reply:

If you have the Westin PRO TRAXX Oval Nerf Bars # 21-21685 or # 21-21680 for your 2009 Chevy Silverado, then the correct replacement mounting hardware kit is # 21-2168PK.

This will include everything needed to install the running boards on your truck. Keep in mind that both the mounting brackets and running boards themselves are vehicle specific, so if these are not the exact model running boards that you have, please let me know and I will be happy to locate the correct mounting kit.

expert reply by: Chris R

0

Answer 1

The first thing that you will need to note is that Nerf Bars and Running Boards are vehicle specific. If the Westin Nerf Bars that you have were pulled off of a vehicle other than a 2007 Chevrolet Silverado 1500 New Body then there is a very good…

view full answer...

Answer 2

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 3

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 4

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 5

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 6

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 7

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 10

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Answer 11

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 12

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Replacement Mounting Hardware for Westin PRO TRAXX Oval Nerf Bars on 2009 Chevy Silverado

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching