Trailer Hitch Wiring for a 2017 Hyundai Santa Fe with the Factory Towing Package
Question:
Tekonsha 118571, I would like information about this product such as if it will fit my 2017 santa fe with factory tow package
asked by: Dave
Expert Reply:
I do have a solution for you, but the Tekonsha T-One # 118571 that you referenced is for a 2017 Hyundai Santa Fe Sport without the factory tow package.
Since you have the factory tow package you will want to go with the Curt T-Connector # C56332 instead. This fits the SE and Limited as well as the Sport.
I have attached a video of this being installed on a similar 2017 Santa Fe for you to reference for the install.
If you will be towing with your Santa Fe then you will also need a trailer hitch as well as a ball mount and hitch ball.
I recommend the Draw-Tite Class III Max Frame Round Tube Receiver Hitch # 75772 if you have a Sport or the Draw-Tite Class III Max Frame Round Tube Receiver Hitch # 75776 if you have an SE or Limited. installation videos have been linked for these as well
One of the more popular ball mount kits that we have is the Curt # C45036 which comes with a Class III ball mount with a 2" hitch ball. The ball mount has a 2" drop which you will want to check out the attached article to ensure that it is the correct one for you.
If you will be using your Santa Fe for anything else just let me know and I can make additional recommendations.
Products Referenced in This Question
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 5250 lbs WD GTW
- 2 Inch Hitch
- 525 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 750 lbs TW
- 5000 lbs GTW
- 7500 lbs WD GTW
- 2 Inch Hitch
- 750 lbs WD TW
- Concealed Cross Tube
- Draw-Tite
more information >
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 2 Inch Ball
- One Ball
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- CURT
more information >
Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Comparing 2" Trailer Hitch Receivers For 2017 Hyundai Santa Fe Sport 2.0 Turbo
- Q&A: Trailer Hitch Recommendation for Best Ground Clearance on a 2013 Hyundai Santa Fe Sport
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Q&A: Can Electric Brakes be Used on a Boat Trailer
- Q&A: Parts Needed To Install 7-Way & Trailer Brake Controller On 2024 Grand Highlander With Factory 4-Way
- Q&A: Do Saltwater and Trailer Electric Brakes Mix Well
- Q&A: Complete Towing Setup for 2023 Hyundai Santa Fe
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Where to Position the Trailer Axle?