Replacement Axles Needed for 2006 EZ Loader Triple Axle Trailer with 74 Spring Center Measurement
Question:
I need to find the correct axles for my 2006 ez loader boat trailer. Its at least 32 foot long and the axles are bent in the middle with the hub coming off a bar. The brackets at 74 inches apart.
asked by: Clyde T
Expert Reply:
We do have a selection of axles with a 74" spring center measurement but you will want to measure your hub-face-to-hub-face measurement as well to make sure that it is 89" before ordering (see attached picture).
These are all rated for 3,500 lbs and come in a variety of ways. For example, part # 35545I-EZ-89 comes with idler hubs that have a 5 on 4-1/2" bolt pattern, and part # T3584F-EZ-8974 comes with the spindles only. These both have EZ Lube spindles on them.
Then without the EZ Lube spindle you will want part # 35545E-ST-89 for the electric brakes, part # 35545I-ST-89 for the idler hub, and part # T3584F-8974 for just the spindle.
Products Referenced in This Question
Dexter Trailer Axle w/ Idler Hubs - EZ-Lube - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Spindles
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Dexter Trailer Axle Beam with Standard Spindles - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Dexter Trailer Axle Beam with EZ-Lube Spindles - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Product Page this Question was Asked From
Dexter Trailer Axle w/ Electric Brakes - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Spindles
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Would Dexter 3,500 lb Axle Made in 1999 Use Same Hubs as Current
- Q&A: How Thick are the Aluminum Tandem Axle Trailer Fenders # HP52VR?
- Article: How to Measure a Trailer Axle
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Most Popular Wheel Bearings
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Are There Rust-Proof Trailer Fenders For 15 Inch Wheels For Tandem Axle Trailers
- Q&A: Correct Tankless Water Heater Replacement for Atwood 6 Gallon 16" x 12"
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Can Electric Brakes be Used on a Boat Trailer
- Q&A: Dexter Replacement Hub/Drum Assembly # K08-247-1G
- Q&A: Could Dexter Torflex Lift Kit Fit 2021 Exiss 7400 Horse Trailer