Will Curt Trailer Hitch, # 13529 Fit a 2006 Chrysler Pacifica
Question:
I have muffler mount and large bracket where the hitch mounts, on the passenger side. Will this hitch work?
asked by: Chris M
Expert Reply:
I believe I know the bracket that you are referring to. Take a look at the installation video for Draw-Tite Trailer Hitch, # 75522 which I have linked for you. In the video, our installer actually uses one of the bolt holes used by the bracket to install the hitch. The mounting brackets on this hitch and Curt Hitch, # 13529, to fit around the contours of the bracket. The exhaust hanger should not be an issue.
If you plan on doing some towing, I recommend the etrailer Ball Mount Kit, # 989900. It comes with 2 ball mounts, a 1-7/8 inch diameter ball, 2 inch diameter ball, a hitch pin and clip.
For trailer wiring, if the vehicle did not come with a tow package, use # C55530. I have included a link to the installation details and a video showing a typical installation for you to view.
if the vehicle did come with a tow package, to add a 4-Way trailer connector, use # 118381.
![Michael H](https://images.etrailer.com/static/images/catg/people/324_tn.jpg)
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Trailer Hitch Recommendation for a 2015 Ford Edge Sport With Hidden Crosstube
- Q&A: How to Determine Tongue Weight on 3400 lbs Pontoon Boat and Trailer