What is Weight of BAKFlip G2 Hard Tonneau Cover # BAK26307-226A0022

Question

Question:

I have a RAM 1500, short bed. Just curious how much the BAKFlip G2 cover weighs? Thanks!

asked by: Bob J

1

Helpful Expert Reply:

The BAKFlip G2 Hard Tonneau Cover # BAK26307-226A0022 that you referenced weighs 74 lbs. This cover is designed to fit a Ford F-150 with a 6-1/2 foot bed though.

Email me back with the year of your truck and the length of your bed and I'll help you pick out the correct G2 cover.

expert reply by: Jameson C

1

Answer 1

It is not recommended to lubricate where the trunnion bars rub on the brackets that are mounted to the trailer frame. Especially if you have a weight distribution with sway control. The brackets create friction between the bars and brackets when the…

view full answer...

Answer 2

The Blue Ox TrackPro Weight Distribution part #BLU77FR is my recommendation for a trailer with 720 lb tongue weight. The trailer once loaded (propane tank filled, batteries, etc) would likely exceed this value and that does not take into…

view full answer...

Answer 3

I called BAK industries to see if they had weight specifications for their tonneau covers. Unfortunately, they do not record these, but there is something that I can offer that might help. The BAKFlip F1, part #BAK72329, and the MX4, part #BAK48329,…

view full answer...

Answer 4

The sizing will be different and since the bed rails are slightly different dimensions the brackets that attach the cover to the truck bed will also be different. You would not be able to take a cover designed for either truck's bed and fit it to…

view full answer...

Answer 5

Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is a…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 8

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. The Replacement Head for Blue Ox SwayPro Weight Distribution Systems part #BXW4011 is for…

view full answer...

Answer 9

To be completely honest the sway control feature of the B and W Continuum part #BW78FR isn't nearly as advanced as the rest of the system. The advertised sway control of this system is in the head of the system between where the ball and the…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

You'll need to adjust the bunks on the Malone LowBed MicroSport Trailer #MAL25FR some to account for the shape of the pontoons but yes, this trailer will have no issues working with your Blue Sky Boatworks 360 Pro fishing kayak!

view full answer...

Answer 12

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

What is Weight of BAKFlip G2 Hard Tonneau Cover # BAK26307-226A0022

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching