Can JT's Strongarm Stabilizer Install on Jayco Eagle 325BHQS with Lippert Ground Control

Question

Question:

Can you tell me if I need special adapters? Also, do you have installation instructions? Thanks!

asked by: Kraig

0

Expert Reply:

Sounds like you have an auto leveling Lippert Ground Control/Level Up jack kit on your trailer.

Yes, the JT Strong Arm Stabilizer System # LC191023 will work with your LCI Level Up System.

I checked with Lippert and found that you can use the JT's Strong Arm Jack Stabilizer Kit # LC191023 with the adapter lugs # LC314592. For your LCI level up system will need a quantity of 6 adapter lugs, these are sold as a quantity of 2 on our site. The manufacture also provided me with instructions I will be sending you in a separate email.

I have linked the adapter lugs to this page for your convenience.

expert reply by: Jameson C

0

Answer 1

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 2

Hi Mark; thanks for the question and I have some good news for you as we have the exact 5th wheel to gooseneck adapter to replace the Turning Point pin box on your Jayco Eagle HT 30.5 CKTS. The correct part is the following: - Gen-Y Hitch Shock…

view full answer...

Answer 3

Hey Trevor, so the B and W Companion Slider hitch part #BWRVK3400 only fits the B and W Turnoverball gooseneck hitches and would not fit the gooseneck hitch of your 2022 Chevy Silverado 2500 with OEM pucks. The funny thing about the Patriot slider is…

view full answer...

Answer 4

There might be a solution but it all comes down to what gooseneck hitch you have installed in your truck. If you can let me know what brand hitch you have I can help find you exactly what type of slider hitch solution would work best. Hopefully you…

view full answer...

Answer 5

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the hitch height…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Hey Jim, congrats on the new truck and fifth wheel - looks great. Our rule of thumb is that you want a minimum of 6" of clearance between the top of the bed rails and the bottom of the trailer loft. You should be just fine to use the bottom hole…

view full answer...

Answer 8

Thanks for the pictures! To replace your Curt Turning Point you will want the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box item #GY48GR. This was made specifically to replace the Turning Point pin boxes. You will also need the Safety…

view full answer...

Answer 9

Hi Joseph, If your leveling system has a round tube design then you won't need the Replacement Swing Bolt #LC314596 and would instead need adapter lugs #LC314592 and shorter swing bolts #LC314595. The adapter lugs can be bolted to the footplate…

view full answer...