Can the Camco Trailer Tongue Jack Stand # CAM44635 be Used on a Trailer Jack with a Wheel

Question

Question:

Can Camco Trailer Tongue Jack Stand be used if the jack has a wheel?

asked by: Kent

0

Expert Reply:

Camco Trailer Tongue Jack Stand # CAM44635 cannot be used on a jack that has a wheel unless you were to remove the wheel first. For a jack with a wheel I recommend the Andersen Rapid Jack # AM3620. Lay it on its side and use the rectangular opening for the jack wheel.

expert reply by: Michael H

0

Answer 1

The best way to jack up a boat trailer with torsion axles, or straight axles for that matter, is to use a trailer jack that is rated high enough for the weight of the trailer at the point the jack is installed. Going with a higher capacity than…

view full answer...

Answer 2

The Ultra-Fab Scissor Jack #UF48-979032 that you referenced is strictly designed as a stabilization mechanism for trailers. This jack mounts to the underside of the trailer and then drops to hold the trailer in place to prevent rocking. These jacks…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The actual locking mechanism is the difference. The Trimax Heavy Duty #TMX42ZR has a much more robust hardened steel lock while the Trimax #TMX65FR uses a tube key style lock for the main lock.

view full answer...

Answer 5

Yes, the Trimax Heavy Duty Adjustable Wheel Lock #TMX42ZR will indeed fit a 15" wheel with a 31x10.50R15 tire. We have records of this lock fitting tires a good bit larger than yours, so a 31" diameter tire is well within parameters…

view full answer...

Answer 6

The only type of wheel locks we will have compatible with your 5/8" studs are the Trimax #TMX65FR or #TMX42ZR. We do not have any wheel locks in the 5/8" size like the 1/2" #RG01-150 you found. And when searching online I…

view full answer...

Answer 7

It's possible you could drill out the lock of the Trimax wheel lock part #TMX65FR and you'd be able to defeat it that way but Trimax doesn't share with us exactly how to defeat their wheel lock so we can't guarantee…

view full answer...

Answer 8

For your application I recommend checking out the Trimax Adjustable Wheel Lock #TMX65FR because it fits 10" to 18" wheels and is one of the most secure options we have to offer. The adjustments are made in 2 different places and not only…

view full answer...

Answer 9

While the Trimax Heavy Duty Adjustable Wheel Lock with Padlock #TMX42ZR will help prevent theft and likely keep your trailer from moving too much, this shouldn't be relied upon as a chock - for that you'd want something like the Trimax Wheel…

view full answer...

Answer 10

I recommend looking at the etrailer Accessories Bag #e98900 as a better option than the Ultra-Fab Universal Carrying Bag #UF34FR. The Ultra-Fab bag was specifically designed for their lightweight wheel stabilizers and would likely not handle the…

view full answer...

Can the Camco Trailer Tongue Jack Stand # CAM44635 be Used on a Trailer Jack with a Wheel

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching