Replacing the Brakes on a 1966 Airstream Travel Trailer
Question:
Hi, Will these brakes fit a 66 Airstream? I cannot find any info on the bolt centers or axle hole diameter. The current brakes are the original Kelsy-Hayes. Thank you.
asked by: Alistair
Expert Reply:
The Dexter Electric Trailer Brake Kit part # 23-112-113 is designed for 6,000 lb axles that use a 5 bolt brake mounting flange. They are compatible with 14.5" to 16" diameter wheels. As long as your trailer has these requirements then the brakes will work well for you. Unfortunately, we do not have information as to what braking assemblies your 1966 Airstream trailer came with therefore you will need to go out to your trailer and physically count the bolt holes on the brake flange and measure the axles/wheel diameter.
When replacing the brakes on a trailer you will always want to use new hardware. If you need new hardware you can use part # 7-5 for the bolts and part # 38LW for the washers.
Products Referenced in This Question
Lock Washer for Brake Mounting Bolt for 12" Brake Assemblies - 3/8" Diameter
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 12 Inch
- Washers
- ABS Fasteners
more information >
Brake Mounting Bolt for 12" Brake Assembly
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 12 Inch
- Bolts
- Redline
more information >
Product Page this Question was Asked From
Dexter Electric Trailer Brakes - Parking Brake Ready - 12" - Left/Right Hand Assemblies - 6K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 12 x 2 Inch Drum
- 6000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: Do I Need Brakes On Both Axles of a Car Hauler Trailer?
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-3/4 - Pre-Greased
- Shop: Hopkins 7-Way RV Style Connector with Molded Cable - Trailer End - 8' Long - RV Standard
- Shop: etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 3
- Search Results: complete 3500 lb axles
- Shop: Trailer Hitch
- Search Results: 25580
- Article: Trailer Wiring Diagrams
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: Most Popular Wheel Bearings
- Video: etrailer Electric Trailer Brake Kit Installation
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Search Results: l44649
- Shop: Trailer Wiring
- Q&A: Replacement Drum Brake Actuator for a 1995 4 Winns Model 3916 Trailer
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Search Results: equalizer
- Article: Trailer Tire Sizing
- Shop: Brake Controller
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Search Results: l68149
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Shop: Gooseneck Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Suspension Enhancement
- Search Results: lug nut
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer