Recommended Weight Distribution System to Control Sway on 7800 lb Travel Trailer
Question:
I own a 2005 suburban 1500 4x4 and want to tow a 26 ft travel trailer that weighs 7800 lbs. What sway bar kit would you recommend? Thank you
asked by: Tim W
Expert Reply:
For your 7800 lb travel trailer, you most likely have a tongue weight range between 780 and 1170 lbs as trailers typically have 10-15% of their total weight as tongue weight. Based on that, I recommend the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control # EQ37120ET. In addition to the tongue weight of the trailer, you also need to account for any cargo behind the rear axle of the Suburban. This weight distribution system is rated for that combined total tongue weight between 800 and 1200 lbs. Ideally when loaded you want to be in the middle of that total tongue weight range so if you have a weight on the higher end of the spectrum, you may want to bump up to the next system # EQ37140ET rated for 1,000 to 1,400 lbs total tongue weight.
This system comes with the hitch ball as well as the pin and clip needed. However, you will need a thin walled socket like # ALL643216 or # EQ70-00-4800 to install the hitch ball. I've attached videos and an article to assist.
Products Referenced in This Question
1-7/8" 12pt Thin Walled Socket - 3/4" Drive - Chromium-Vanadium Steel
- Hand Tools
- Ratchets and Sockets
- Sockets
- SAE
- 3/4 Inch Drive
- 1-7/8 Inch
- Alloy Steel
- Powerbuilt
more information >
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 14,000 lbs GTW, 1,400 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1200 lbs
- 1300 lbs
- Equal-i-zer
more information >
Thin Walled Socket for Equal-i-zer Hitches
- Accessories and Parts
- Weight Distribution Hitch
- Tools
- Socket
- Equal-i-zer
- Equal-i-zer
more information >
Product Page this Question was Asked From
Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 12,000 lbs GTW, 1,200 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- Equal-i-zer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Determining Trailer Tongue Weight
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Does Weight Distribution Lower Tongue Weight on Hitch of Tow Vehicle
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Q&A: Can the TorkLift Everest Weight Distribution System Be Used w/ a SuperTruss Extension?
- Q&A: Recommended TorkLift Hitch and Extension for a 2024 Chevy Silverado 3500
- Q&A: Can I Extend My Hitch Without Using TorkLift Hitch and SuperTruss Extension
- Q&A: Is there a Longer Weight Distribution Shank for a B&W Continuum?
- Q&A: Can Air Bags and a Weight Distribution Hitch be Used Together?
- Q&A: Recommendation For Reducing Sag & Sway While Towing a V-Nose Enclosed Trailer Behind 2022 Ford F-150
- Article: 7 Common Questions Everyone Has About Trailer Tires