Troubleshooting Trailer Light Fuses on 2012 Ram 3500
Question:
Hey my turn signals and brake lights work, but my lights arent working from my 2012 Ram 3500 Laramie crew cab! Dont have a manual where would I find fuse for lights under hood or in truck under dash??
asked by: Buck B
Expert Reply:
I was able to find the fuse information for you. You will want to check J01 a 40 amp green cartridge fuse, but most likely it is J14 a 20 amp blue cartridge fuse. This is found in the engine compartment under the hood in front of the battery on your 2012 Ram 3500.
You can use a circuit tester like the Powerbuilt # PTW2993 to test your wiring functions and ensure you are getting power before that fuse as well as after it. If the problem isn't at the fuse, you will need to trace the wire checking it by probing through the insulation every few feet to determine where a short is.
Product Page this Question was Asked From
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Troubleshooting Brake Controller Installations
- Q&A: How to Make an Adapter to Go from Semi Truck 7-Way Round to RV Style 7-Way Blade on Trailer
- Q&A: Will The Curt Dinghy Wire Harness # C96JR Interfere With Activation Of A Blue Ox Patriot
- Q&A: Trailer Turn Signals Both Blink when Just Left Turn Signal is Activated
- Q&A: Trailer Lights Left Side Turn Signal and Brake Lights Not Working
- Q&A: Troubleshooting No Running Lights on Trailer but Turn Signals and Brake Lights Work
- Q&A: Troubleshooting Lack of 12V Power at 7-Way Trailer Connector on 2019 Ford F-150
- Article: Trailer Lighting Requirements