Installing Rubber Adjusters for Tire Chains on Truck with Dual Rear Tires

Question

Question:

Great video on how to put chains on dual tires Ive never used chains. Should you get 2 rubber tensioners so that you put it on the outside of the outside tire and also on the inside of the inside tire?

asked by: DON S

1

Helpful Expert Reply:

When using tire chain adjusters, such as the Titan Chain RA10 Rubber Adjusters # TCOA2 that you referenced, you should only need to use one on the outside of the outside tire. This will allow for a better and tighter fit when using chains on your vehicle tires. This set includes 2 adjusters for one pair of chains.

Since you will be using the chains on your Silverado 3500, I recommend looking at the Titan Chain Multi-Arm Rubber Tire Chain Adjuster # TCMA3. This particular adjuster is designed specifically for heavier trucks like yours.

expert reply by: Chris R

1

Answer 1

The Titan Chain RA10 tire chain adjusters you mentioned, part #TCOA2 are extremely versatile. They'll fit tire chains for 14-24 inch rims.

view full answer...

Answer 2

For infrequent use I usually recommend cable style chains like #TC2028 with tensioners #TCMA3 to keep the cables tight and centered. Cables also require little clearance and cost less than traditional chains. You would only need to have them on the…

view full answer...

Answer 3

The Titan Chain Link and Spring Tire Chain Adjuster for Light Trucks #TCSA2 when used with the Titan chains part #TC2828 has the advantage of being all metal instead of having a rubber component that over time might be prone to failing. These are…

view full answer...

Answer 4

From the sound of your question, I assume you meant the #PW3029C instead of "TC3029C." Also, it sounds like you have size 275/70-18 tires on your 2017 Ford F-350 Super Duty (single rear wheel). Per the Ford user's manual, I recommend…

view full answer...

Answer 5

For your 285/70-17 tires on your 2021 Jeep Gladiator, technically both the #TCOA2 and #TCOA3 will fit your wheels. However, I recommend going with the #TCOA2 because they will be a bit easier to stretch in order to fit on your chains.

view full answer...

Answer 6

The correct Titan Chain Multi-Arm Rubber Tire Chain Adjuster will be the Titan Chain Multi-Arm Rubber Tire Chain Adjuster for Heavy Trucks - 1 Pair #TCMA3 work with chains for 15" - 24.5" rims, and are also designed for heavy trucks like…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

We have a similar set of Titan twist link tire chains that fit your tire size of 265/75-16 with the part #TC2228 but the size you mentioned would not fit so you would not want to go with them.

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Hey Roy, yes it does look like the Titan Chain Snow Tire Chains #TC2851 you're looking at will fit the tires on your 2023 Entegra Coach Anthem; have fun on your trip!

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hey Mark, since we know your Brinkley Z3100 has the Rhino style pin box, the correct Gen-Y fifth wheel to gooseneck adapter is the part #GY98GR which comes with the auto latch you mentioned wanting as well!

view full answer...