Recommended Adjustable Coupler Lock for Tight Fit

Question

Question:

HOW CAN I MAKE A TL33 LOCK FIT TIGHTER ON A 2BALL COUPLER

asked by: E.K M

0

Expert Reply:

The Blaylock EZ Lock Trailer Coupler Lock for 1-7/8", 2", and 2-5/16" Couplers - Aluminum # BLTL-33 isn't necessarily designed for a tight fit. It is designed to give you a couple different pin location options but the latch is really all that keeps it in place tightly as the pin just prevents removal.

If you want a tighter lock, I recommend the Fastway Universal Trailer Coupler Lock for 1-7/8", 2" and 2-5/16" Couplers # FA86-0015-318 which allows for many adjustment points for a precise fit. I've attached a video to assist.

expert reply by: Jason S

0

click to enlarge

Answer 1

Sure thing! The EZ Lock Trailer Coupler Lock #BLTL-20 is for Bulldog Collar-Lok-style couplers while the EZ Lock Trailer Coupler Lock #BLTL-33 is designed for Fulton, Shelby, Dutton-Lainson, Atwood, and similar couplers. I've attached some review…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

No, it does not but I have one that does. It is the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box item #GY86GR. This pin box is custom designed for the Lippert Rhino bolt pattern. It has an identical 21,000 lbs towing capacity and a 3,500 lbs tongue…

view full answer...

Answer 4

The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box #GY38FR is not going to allow for any additional turning clearance than the 5th wheel king pin with a fixed point hitch. We have offset gooseneck ball options depending on what type of…

view full answer...

Answer 5

Hey William, the E6 error on a Furrion wall thermostat indicates an Open circuit Humidity Sensor issue. Most likely the sensor is bad and needs to be replaced as this is a pretty rare error code.

view full answer...

Answer 6

I found some dimensions for the Apollo AAC24OTRB and found that it is height 12.0 in, width 20.6 inches and depth 20.5 inches. While we don't have anything that matches that exactly the closest option we have would be the Furrion part #FMSN09BL…

view full answer...

Answer 7

The Progressive Dynamics RV Power Control Center #PD4135K is going to be the closest in dimensions to replacing the Magnetek model 80 power center you have. This control center fits inside a 10-1/4" long x 7" tall cutout and is 11-1/4"…

view full answer...

Answer 8

The Replacement Gear Motor with Pinion Gear #BVB0601-00 is the correct replacement for the Ventline Ventadome roof vent model V2119. It sounds like you also need the Replacement Operator, Knob and Screw for Ventline Ventadome Trailer Roof Vents…

view full answer...

Answer 9

I am sorry to be the bearer of bad news Gregg but your Voyager camera WVCMS130AP is part of the first gen camera system, which we no longer carry since it's been discontinued by the manufacturer. Voyager was considerate enough to make sure their…

view full answer...

Answer 10

The Fastway Universal Trailer Coupler Lock for 1-7/8", 2" and 2-5/16" #FA86-0015-316 will work with a coupler that is 4-1/2 inches wide and are a great (not to mention popular) style of lock. This lock is sold under multiple part…

view full answer...

Answer 11

We don't have an option that will allow for all of them to be keyed alike but I can get you down to one key for the hasp locks and another for the coupler lock. The Trimax Puck Locks for Trailer Door Hasps #TMX73FR comes with three keyed-alike…

view full answer...