Replacement Parts for Balcrank 16006 Brake Actuator
Question:
I think I only may need a new shock and cylinder. I took some more pics. It is a Balcrank product. Can you advise me on the corrects parts. I really appreciate the help.
asked by: JORDAN S
Expert Reply:
To replace your surge brakes there are a few things you'll need to know, the first being if you have drum or disc brakes. You can then choose the correct disc or drum brake assembly; you'll need to know your axle capacity and wheel size for either. You will also need to know your bolt flange pattern and drum size if you have drum brakes.
You will then need the correct brake actuator and a brake line kit, which is going to be different if you have disc or drum brakes. I have added links to help articles which detail what you'll need for both disc and drum brakes, a help article on determining wheel bolt pattern, as well as links to our selection of actuators, brake lines, and brake assemblies for both disc and drum brakes. If you let me know the above information I'd be happy to help you get the correct parts so you can add brakes.
Products Referenced in This Question
Replacement Master Cylinder for Toledo Drum Brake Actuators
- Accessories and Parts
- Brake Actuator
- Hydraulic Drum Brakes
- Master Cylinder
- Toledo
more information >
Toledo Actuator - 2" Bulldog Coupler - 5,000 lbs.
- Brake Actuator
- Surge Brake Actuator
- A-Frame Coupler
- Weld-On
- 5000 lbs GTW
- 2 Inch Ball Coupler
- Drum Brakes
- No Lockout
- Toledo
more information >
Replacement Nylon Pivot Bushing for Toledo Brake Actuator
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Hardware
- Bushings
- Toledo
more information >
Replacement Pivot Shaft for Toledo or Balcrank Brake Actuator
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Hardware
- Pivot Shaft
- Redline
more information >
Replacement Shock Absorber for Toledo Brake Actuators
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Shocks
- Toledo
more information >
Product Page this Question was Asked From
Demco Hydraulic Brake Actuator - Drum - Zinc - 2" Ball - 7,000 lbs
- Brake Actuator
- Surge Brake Actuator
- Straight Tongue Coupler
- Bolt-On
- 7000 lbs GTW
- 2 Inch Ball Coupler
- Drum Brakes
- No Lockout
- Demco
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Replacement Pivot Shaft for Toledo or Balcrank Brake Actuator
- Shop: Replacement Nylon Pivot Bushing for Toledo Brake Actuator
- Shop: Replacement Shock Absorber for Toledo Brake Actuators
- Q&A: Parts Needed To Install Electric Drum Brakes On a PWC Trailer With 3,000LB Axle
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 6 on 5-1/2
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Shop: Replacement Master Cylinder for Toledo Drum Brake Actuators
- Search Results: 1844~2
- Q&A: Where to Measure on Trailer Spindles to Determine Replacement Hubs
- Search Results: axle kits
- Search Results: suspension kit
- Search Results: bearing buddy
- Search Results: bearing buddies
- Article: How to Measure the Bolt Pattern of a Trailer Wheel
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: etrailer Electric Trailer Brake Kit Installation
- Video: Dexter Trailer Hub and Drum Assembly Installation 8-247-50
- Video: Toledo Replacement Shock Absorber Installation
- Search Results: drop hitch
- Shop: Brake Controller
- Video: Toledo Master Cylinder for Toledo Brake Actuators Installation
- Shop: Trailer Hitch
- Q&A: When Do Brakes Need to be Added to Both Axles of Tandem Axle Trailer
- Search Results: 84656uc3
- Video: Demco eZ-Latch A-Frame Trailer Coupler Review and Installation
- Video: etrailer A-Frame Trailer Coupler - Standard Coupler - CA-5280-QB Review
- Video: Review of etrailer Trailer Fenders - Tandem Axle Trailer Fenders - HP94VR
- Article: Printable Trailer Bolt Hole Pattern Template
- Q&A: Can Weld-On A-Frame Trailer Coupler be Replaced with a Bolt-On Coupler
Jordan
12/21/2017
I think I only may need a new shock and cylinder. I took some more pics. It is a Balcrank product. Can you advise me on the corrects parts. I really appreciate the help.