Will Sunlight Affect the Valterra RV Water Tank # R8036

Question

Question:

Will the tank or water be effected at all if I mount this in my truck bed or on a open utility trailer? Thank you,

asked by: Cody P

0

Expert Reply:

Since the Valterra RV Water Tank # R8036 is black sunlight will make the water and the tank warmer, but aside from that there wouldn't be any other affects due to the tank being out in the open.

expert reply by: Jameson C

0

Answer 1

For use with the Valterra Rocket Water Hand Pump #RP800 we offer several sizes of fresh water tanks. Part #R8012, 6 gallon, 12 x 8 x 16-inches Part #R8018, 9 gallon, 18 x 8 x 16-inches Part #R8036, 18 gallon, 36 x 8 x 16-inches We do not have a 1 or…

view full answer...

Answer 2

You could use the Valterra RV Water Tank, #R8036 on a system with a hand pump, but not an electric water pump. At this time we do not have a water tank available that can be used with an electric water pump.

view full answer...

Answer 3

The reason you can't use an electric pump with the Valterra RV Water Tank #R8036 is because they are made from lightweight plastic, and is baffled for surge control so they aren't designed to withstand the additional pressure that is created…

view full answer...

Answer 4

No, the Epicord 30 Amp Twist Lock Power Inlet #277-000137 uses a standard twist lock power inlet so you can use other power cords. We do have adapters that go from a 15-amp male power plug from your RV to a 30-amp receptacle. I recommend using the…

view full answer...

Answer 5

For 30 amps like what the Progress Dynamics RV Power Control Center with AC/DC Panel and Converter/Smart Charger #PD4135K is rated for you'd need to use 10 gauge wire minimum if made from copper or 8 gauge if made from aluminum. For a new socket…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 12

From previous customers with the Grand Design Solitude S Class ST2930RL we know that know that it has the Lippert 1621 pin box model and since we know the GVWR of the RV is 15k so for a MORryde you'd want the part #MR84VR.

view full answer...

Will Sunlight Affect the Valterra RV Water Tank # R8036

Product Page this Question was Asked From

Continue Researching