Frame Cradle with Anti-Sway Cage Recommendation for Bike Rack with 1 inch Diameter Arms

Question

Question:

I have an old model Yakima trunk rack not sure of model name which has 1inch outside diameter arms onto which the cradles slide. Will the Y8890158 pieces fit? The arms are straight tubes made of painted metal. Actually all I need are the antisway cage pieces if those are sold separately. Thanks,

asked by: Shaun W

1

Helpful Expert Reply:

We have a set of Thule frame cradles that we know fit a 1 inch diameter bike rack tube, but the current Yakima cradles are larger so they would not work.

The Thule T3 cradle, # 853-5829, fits on Thule bike racks with 1 inch diameter arms and would work well for you.

The anti-sway cage needed is part # 753-3530 and the strap part # 852-3006-001.

expert reply by: Jameson C

1

Answer 1

Judging by your photos, you definitely have the Thule Expressway 995. I have exactly what you need! I went ahead and confirmed with Thule that the direct replacements are the Replacement T2 Cradle #853-5829 and the Replacement Rubber Strap #753-3535.…

view full answer...

Answer 2

Yes, there is a no-sway cage that works with bike racks that use the Replacement T2 Cradle Body for Thule Bike Carriers #853-5829. The racks that use that cradle also use the Replacement No Sway Cage for Thule Ridgeline and Revolver #753-3530.…

view full answer...

Answer 3

You only need one per bike and it goes on the rear cradle. The Thule Replacement No Sway Cage for Thule Ridgeline and Revolver #753-3530 is the part that keeps your bikes from making contact with each other and your vehicle. The cradles hold your…

view full answer...

Answer 4

We actually did a video for the replacement straps that fit the Thule Camber part #TH9056 that you referenced with part #TH536. Check out the link on this page to see the entire process walked through.

view full answer...

Answer 5

Cradles that are attached to the straps like in the photo you provided are unfortunately not available. According to Thule, replacements for your Trailblazer 998 are going to be separate cradles and straps. The cradles are #753-3535 while the straps…

view full answer...

Answer 6

I checked with Thule and the Hitch Lock and Anti Rattle Device part #THSTL2 does fit your Thule Revolver bike rack. For replacement frame cradles Thule recommends the T3 cradle part #853-5829, for straps part #753-3535, and then for anti-sway cradles…

view full answer...

Answer 7

The Thule Stay-Put Cradle #853-7887 is designed for the Parkway, Roadway, Hitching Post Pro and Passage bike carriers. It is a basic, entry-level cradle, whereas the Thule T3 #853-5829 replacement cradle has an extra level of cushion and has a more…

view full answer...

Answer 8

You need one Thule No Sway Cage per bike. So if your Thule bike rack can carry four bikes, you will need four of part #753-3530.

view full answer...

Answer 9

I spoke with my contact at Thule and the cradles like in the picture you have provided are no longer available. However, the T3 cradles, #853-5829, and strap, #753-3535, will fit in place of the original cradles.

view full answer...

Answer 10

The Replacement Rubber Straps for Yakima BedRoc and Older Big Horn Models #Y8820103 that you referenced measure 7-3/4" long x 1-1/4" wide.

view full answer...

Answer 11

I have a great solution for you. I confirmed with my contact at Yakima that the Replacement Cradle for Yakima HangOut or KingJoe Trunk Mounted Bike Rack - Qty 1 #Y8890153 will not fit your Yakima Kingpin 4. However, Yakima did confirm that the…

view full answer...

Answer 12

The bike rack model name or part number would be a big help here, but I believe we have what you are looking for. I went out to the warehouse and got a set of the Replacement Rubber Straps for Yakima BedRoc and Older Big Horn Models, #Y8820103, and…

view full answer...

Frame Cradle with Anti-Sway Cage Recommendation for Bike Rack with 1 inch Diameter Arms

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching