Recommended Trailer Hitch and Everything Including Trailer for 2014 Chevy Camaro
Question:
Curious how much a trailer that holds tires, to attach to my 2014 camaro would be, hitch included and all that jazz. I need the whole kit.
asked by: Anthony S
Expert Reply:
For your 2014 Chevy Camaro, I recommend starting with the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 24850 which is a confirmed fit. This is an easy installation and will give you a sturdy hitch receiver with a black powder coat finish over an e-coat base for rust protection.
Then for a ball mount, I recommend # 3594 which will get your hitch to a usable height so your trailer will be closer to level. For this ball mount/draw bar, you will need a pin and clip which are included and then you'll also need the 2 inch hitch ball # 19258.
If your Camaro has LED lights, then for the wiring harness I recommend the Tekonsha Upgraded Modulite Vehicle Wiring Harness Kit with 4 Pole Trailer Connector (Includes Install Kit) # C59496.
If you don't have LED lights on your Camaro, then I recommend the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56197. This custom-fit T-connector plugs into your factory wiring harness, which is located in your trunk. You will need to remove the rear scuff panel and trunk liner to access this harness, but it is simply plug and play.
Finally, for your utility trailer, I recommend the Detail K2 Mighty Multi A-Frame Utility Trailer # K2MMT5X7. This is easy to assembly and will give you the capacity for holding tires as you mentioned. It will come with everything you need other than basic tools to assemble.
Let me know if your have any questions.
![Jason S](https://images.etrailer.com/static/images/catg/people/1044_tn.jpg)
Products Referenced in This Question
2" Hitch Ball - 3/4" Diameter x 1-9/16" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 1-9/16 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- Draw-Tite
more information >
Draw-Tite Drawbar for 1-1/4" Hitches - 4" Rise - 10" Long - 2,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Rise - 4 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- Draw-Tite
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- 8 Feet Long
- Universal Fit
- 4 Flat
- CURT
more information >
Detail K2 Mighty Multi A-Frame Utility Trailer - 7-1/2' Long - 1,640 lbs
- Trailers
- Utility Trailers
- Platform
- 1640 lbs
- TIlt Bed Frame
- Cargo
- Wheeled Equipment
- 4W x 7L Foot
- Powder Coated Steel
- Detail K2
more information >
Product Page this Question was Asked From
Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
![Draw-Tite Ball Mounts - Fixed Ball Mount - 3594 Review](https://images.etrailer.com/static/images/faq/Demo-Draw-Tite-Ball-Mounts-3594_150.jpg)
![Detail K2 Mighty Multi A-Frame Utility Trailer Assembly](https://images.etrailer.com/static/images/faq/install-detail-k2-a-frame-utility-trailer-k2mmt5x7_150.jpg)
![Trailer Hitch Installation - 2010 Chevrolet Camaro - Draw-Tite](https://images.etrailer.com/static/images/faq/install-trailer-hitch-2010-chevrolet-camaro-24850_150.jpg)
![Detail K2 Mighty Multi A-Frame Utility Trailer Review K2MMT5X7](https://images.etrailer.com/static/images/faq/review-detail-k2-mighty-multi-utility-trailer-k2mmt5x7_150.jpg)
![Draw-Tite Sportframe Drawbar 4 Rise 2000# Kit Review](https://images.etrailer.com/static/images/faq/review-drawbar-3594_150.jpg)
![Tow Ready 2 Inch Hitch Ball Review](https://images.etrailer.com/static/images/faq/review-tow-ready-hitch-ball-19258_150.jpg)
Continue Researching
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Recommended Trailer for Bass Pro Pond Prowler 10 Foot Fishing Boat
- Article: Performance Chips and Modules
- Q&A: Trailer Wiring Harness Fit For 2015 Chevy Camaro Convertible With Non-LED Lights
- Q&A: Trailer Wiring Harness for a 2014 Chevy Camaro with LED Tail Lights
- Q&A: Trailer Hitch Recommendation for a 2011 Chevy Camaro Convertible
- Q&A: Could ERS120D81 Ramp Door Spring Be Cut Down for Use on a 6 ft Wide Enclosed Trailer
- Q&A: Trailer Hitch Recommendation for a 2013 Chevy Camaro
- Article: Gooseneck to 5th Wheel Adapters
- Q&A: Will the Curt Class I Trailer Hitch # C11222 Fit the 2012 Chevrolet Camaro LT or SS
- Article: Trailer Wiring Diagrams