Generator Cargo Carrier for a 2000 Honda Odyssey
Question:
I need a cargo carrier strong enough to hold a Honda EU7000is generator 261 lb dry, plus 5 gallons gas 40 lb? and around 50 lb extra for misc. stuff. Will need to buy car hitch to match, for 2000 Honda Odyssey V6 van. What is the best equipment for this?
asked by: J M
Expert Reply:
Your best setup is going to be a Class III trailer hitch with a ramped carrier, given the dry weight of the generator. 300 pounds is a pain to lift off of the ground even once, so we'll stick to ramps.
Prior to equipping the hitch, you'll want to verify your vehicle's towing and tongue weight capacity with your owner's manual or manufacturer.
For the trailer hitch, your best option is the Draw-Tite Class III Max Frame Receiver, part # 75270. This provides the ability to take advantage of up to 675 pounds of the vehicle's tongue weight capacity With a 2 inch hitch, you'll be able to use a wide range of cargo carriers and accessories.
For the carrier, I recommend the Flint Hill Goods 30 x 50 Carrier with 48 Inch Ramp, part # FHG77ZR. This will allow you to roll the generator up and into the carrier, as well as coolers and any other wheeled gear you may have. The mesh styled bottom will provide a wide range of tiedown points for you to secure your gear to, and enough room to carry the gas separately from the generator, as well as your other gear.
I've included a video of our team installing the hitch onto a 2000 Honda Odyssey and a video review of the cargo carrier. Additionally, I've added our hitch installation FAQ to help the process be smoother for you.
Products Referenced in This Question
Flint Hill Goods 30" x 50" Wheelchair Carrier w/ 48" Ramp - 2" Hitch
- Hitch Cargo Carrier
- Carrier with Ramp
- Wheelchair Carrier
- Folding Carrier
- 30 Inch Wide
- Heavy Duty
- Fits 2 Inch Hitch
- 50 Inch Long
- Steel
- Flint Hill Goods
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 675 lbs TW
- 4500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 675 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: My Trailer Hitch Doesn't Fit
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Recommended Hitch for VelociRAX 5 Bike Rack on 2012 Honda Odyssey
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com
- Q&A: Comparison Between Draw-Tite 76025 and EcoHitch 306-X7253 for 2015 Honda Odyssey
- Article: How to Measure for Trailer Hitch Drop
- Article: Trailer Wiring Diagrams
- Article: Transmission Cooler
- Q&A: Choosing OEM or Aftermarket 5th Wheel Puck System for 2021 Ford F-250
- Q&A: How To Install a 7-Way Trailer Connector On a 2016 Honda Odyssey
- Q&A: Honda Odyssey Custom Built Class III Round Tube Trailer Hitch Bolt Sizes
- Q&A: Solution for Keeping RV Furrion Refrigerator Doors Closed when Travelling