Available Gooseneck and 5th Wheel Towing Adapters

Question

Question:

I would like to know if you have a 5th wheel plate adapter to a Post Pin style hookup. tried your search but nothing!

asked by: Ellery

0

Expert Reply:

We do carry a broad range of towing adapters for 5th wheel and gooseneck hitches and trailers that will allow one type to tow the other. All are shown on the linked page.

The key to finding the right one is to use the filters on the page to select the nature of the set-up and to what you're looking to connect.

For instance, if you wanted a way to use a gooseneck trailer coupler on a truck with 5th wheel rails you might use the Curt Above-Bed Gooseneck Trailer Hitch for Fifth Wheel Rails # 16055.

expert reply by: Adam R

0

Answer 1

The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box #GY48GR is a great option to help reduce the chucking and jarring. Since the turning point pin box offers no shock absorption at all, this will be a very nice upgrade. Also, I am not sure…

view full answer...

Answer 2

First, I have included a link to all of the gooseneck hitches we carry that fit in 5th wheel rails. The Curt Spyder, #16085, has a low profile design and it is heavier than the Pro Series plate style hitch #49080. Besides that, there really are not a…

view full answer...

Answer 3

The two rails you mentioned, part #RP58058 and #C16204, are basically the exact same rails made by two different companies. They are both made to the industry standard rail design so either will work great with the Reese hitch part #RP30083 that you…

view full answer...

Answer 4

We do have hitches that will fit your 1996 Ford F-450, but the Curt Trailer Hitch Receiver #C15845 you referenced is not a confirmed fit.There are 3 options for your f-450 Cab and Chassis, a 2" receiver tube, 2 1/2" receiver tube and Pintle…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...