Trailer Hitch that Fits 2018 Lexus ES 350

Question

Question:

what hitch fits a 2018 Lexus ES 350?

asked by: Scott

0

Expert Reply:

The Draw Tite hitch part # 36530 is a confirmed fit for your 2018 Lexus ES 350 and would be a great choice for you.

I attached an install video for the hitch for you to check out as well.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The Curt Trailer Hitch, part #C11362 is designed to fit a 2013 - 2016 Lexus ES 350, and 2013 - 2016 Lexus ES 300h Hybrid. If this is the vehicle you are asking about then the C11362 will work for you. It does require permanent removal of the heat…

view full answer...

Answer 2

For the 2016 Lexus ES 350 I recommend Draw-Tite trailer hitch #36530 for a few reasons. First, it is a Class II hitch which means you are not limited to carrying just 2 bikes like you would with Curt hitch #C11362. And second if you did use the…

view full answer...

Answer 3

We have confirmed with Draw Tite that the hitch part #36530 is a confirmed fit for your 2016 Lexus ES 350. In some cases we have seen trailer hitches get bent in shipping and have that cause an issue for getting the hitch to bolt up but typically the…

view full answer...

Answer 4

There is a slight difference between the etrailer Trailer Hitch Receiver #e98869 and Curt Trailer Hitch Receiver #13241 that fits your 2020 Nissan Frontier, which is the finish. The etrailer hitch has a rugged matte black finish which is really good…

view full answer...

Answer 5

I have a solution but the Hidden Hitch Trailer Hitch Receiver 90072 you referenced will not fit your vehicle, and currently there is not a Hidden Hitch trailer hitch receiver that is made to fit your 2017 Lexus ES 350. The only two options made for…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 11

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 12

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Trailer Hitch that Fits 2018 Lexus ES 350

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching