Derale Combination Transmission and Engine Oil Cooler # D15902 Recommendation

Question

Question:

Need recommendation for both coolers. Occasionally pulling 1800 lbs - 2500 lbs travel trailer w/2009 Toyota Tacoma 2.7 engine.

asked by: Vince

0

Expert Reply:

Since you are looking for an engine oil cooler and a transmission cooler I would recommend a Derale Combination Transmission and Engine Oil Cooler # D15902. You will be able to route both your transmission fluid and engine oil through this unit to keep both your engine oil and transmission fluid cool.

I attached an FAQ on transmission coolers and engine oil coolers as well as a video of a transmission cooler being installed for you to check out.

expert reply by: Jameson C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

I'm not 100 percent sure what you mean specifically by "in series" but the Derale Series 8000 Plate-Fin Transmission Cooler Kit #D13503 is designed to be a supplemental cooler so it will work along with the factory transmission cooler…

view full answer...

Answer 6

Instead of replacing your factory cooler, you can add a supplemental cooler to improve the performance of your 2012 Ford F-150's transmission. The cooler I recommend for you is the Derale Series 8000 Plate-Fin Transmission Cooler Kit #D13503.…

view full answer...

Answer 7

For your 2013 Ford F-150 with 3.5L V6 EcoBoost, I recommend the Derale Series 8000 Plate-Fin Transmission Cooler Kit w/Barb Inlets - Class III - Efficient #D13503. This cooler has furnace-brazed aluminum construction and 3/4 inch turbulator plates…

view full answer...

Answer 8

The Derale Tube-Fin Engine Oil Cooler Kit w/ Spin-On Adapter (Multiple Threads) #D15551 is not a vehicle-specific fit. It will work for your 2017 Ram 1500 so long as you have the required space to mount it; the heat exchanger is 16-5/8" wide x…

view full answer...

Answer 9

My contact at Derale advised that the approximate additional oil capacity resulting from the installation of their oil cooler #D15551 will be in the vicinity of 7 - 8 fluid ounces. This can vary depending on the length of the oil lines since some…

view full answer...

Answer 10

The newer Chevrolet and GM pickup trucks have a known power deficiency issue with the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras #FCE48TASL-05. There is likely nothing wrong that you did, the problem is the…

view full answer...

Answer 11

You can use a transmission cooler like an engine oil cooler, however, to make it work properly there are adapters and modifications that will be required. A better option would be the Derale Engine Oil Cooler #D15501 which will fit your 2009 Chevy…

view full answer...

Derale Combination Transmission and Engine Oil Cooler # D15902 Recommendation

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching