Which Models of the 2015 Honda CR-V Does Draw-Tite Trailer Hitch Receiver # 75742 Fit
Question:
Which models of the 2015 Honda CR-V does this hitch fit?
asked by: Sean
Expert Reply:
The Draw-Tite trailer hitch receiver, part # 75742, fits all model types of the 2015 Honda CR-V. I've linked an install video for you.
If you're going to be towing with your CR-V you can use part # 118561 for a wiring harness. This provides you with a 4-way trailer connector to power its lights.
You'll also need a ball mount and hitch ball. I've attached a link of our selection of ball mounts for a 2 inch hitch receiver as well as an article to help you determine the correct rise or drop you may need. Once you choose a ball mount you can then choose a hitch ball to fit it.
One way to make choosing a ball mount easier is to go with an adjustable ball mount like the B&W Tow & Stow # BWTS10038B. It features the ability to be flipped under the hitch when not using it and will provide up to 5-1/2 inches of rise or 5 inches of drop.
For a pin and clip to fit you can use # PC3 or if you'd like to have a locking pin you can use # BX8858.
I've also included links to some articles on towing that you might find helpful.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 7.5K - Black
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Matte Black
- Drop - 5 Inch
- Rise - 5 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class IV
- B and W
more information >
Blue Ox Trailer Hitch Receiver Lock for 2" Hitches
- Trailer Hitch Lock
- Standard Pin Lock
- Keyed Unique
- Fits 2 Inch Hitch
- Flush Pin
- 2-3/4 Inch Span
- Blue Ox
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 4 Inch Span
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 675 lbs TW
- 4500 lbs GTW
- 2 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Flat Towing Package for 2012-2014 Honda CR-V
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Best Bike Racks for Electric Bikes
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: My Trailer Hitch Doesn't Fit
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: How To Carry E-Bikes and Flat-Tow a Vehicle on the Back of an RV
- Q&A: What is the Size of the Bolts that Attach to My Frame from the Draw-Tite Hitch # 75742?
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Recommended Flat Towing Components For A 2024 Chevy Trax
- Q&A: What Tool Can be Used to Cut Plastic Underbody for Trailer Hitch Installation on a 2014 Honda CR-V
- Q&A: Differences Between Curt, Draw-Tite, and etrailer.com Trailer Hitches for 2019 Subaru Outback Wagon
- Q&A: Choosing Correct Hitch Tongue Weight Capacity for Using a 4-Bike Platform Bike Rack on Honda CR-V
- Article: 5 Things to Know About Weight Distribution Hitches