Dimensions of the T-Bolt Included with the Replacement Adapter # 8880637

Question

Question:

Hi, Im wondering what the measurements are for the flat metal section of the bar adapter. I have a pair of old bars with a t-slot and would like to use them with my timberline towers. I want to make sure the adapter will fit into the .44 inch opening.

asked by: Danielle

0

Expert Reply:

The flat part of the t-bolt with the Replacement Adapter and Seat for Yakima JetStream Crossbars # 8880637 measures 3/4" x 1-3/16" as demonstrated in the attached photo.

This adapter is compatible with your TimberLine towers, but was made by Yakima specifically for their JetStream crossbars. If you let me know the length of the crossbar that you need and which color (Black or Silver) you would like I can recommend the appropriate JetStream crossbars for you.

expert reply by: Jon G

0

click to enlarge

Answer 1

While similar the two part numbers are different. The part #8880637 is for the Yakima Jetstream style of crossbars whereas the part #Y03541 is for the Yakima HD bars. Because you have the Jetstream bars you would want the part #8880637.

view full answer...

Answer 2

To install a set of Yakima Jetstream crossbars to a Skyline tower you do need the adapter part #8880637.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 8

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 9

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 10

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 11

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 12

Both the Rhino-Rack Vortex Aero and Thule WingBar roof rack systems have very nice features and would work well for your 2014 Hyundai Santa Fe. Both systems are designed to work on vehicles that have the flush mounted rail system. As far as the…

view full answer...

Dimensions of the T-Bolt Included with the Replacement Adapter # 8880637

Product Page this Question was Asked From

Continue Researching