Will the Replacement Cam Lock Cylinder for RVs # 295-000004 Rotate 360 Degrees

Question

Question:

My current locks have a removable washer in the end that determine movement and stops the key from rotating 360 degrees. Is there something internal that stope the key from turning 360 degrees? Need to make sure before purchase. Thanks

asked by: Rusty B

0

Expert Reply:

I went out to the warehouse and checked the Replacement Cam Lock Cylinder for RVs # 295-000004 that you referenced and the keys will only rotate 90 degrees. They will not rotate a full 360 degrees like your current locks do.

expert reply by: Jon G

0

Answer 1

To increase your security, I recommend replacing any 1-1/8 inch cam locks with #295-000004 and simply select keyed alike from the drop down to get your number of replacements on the same key. Global Link uses hundreds of keys so you will greatly…

view full answer...

Answer 2

The Replacement Cam Lock Cylinder #295-000004 is measured at the threads, so you have done it correctly. I went to the warehouse and got the same measurement as your photo, 1-1/8". You would not be able to order these cylinders to match…

view full answer...

Answer 3

The DOM97FR you were looking at is no longer available but the Dometic Part-Timer RV Toilet - Standard Height - Round Bowl - Slow Close Lid - White Ceramic Item #DOM57FR has a 20" height without the sprayer like you were wanting.

view full answer...

Answer 4

We can get the Replacement Cam Lock Cylinder for RVs part #295-000004 keyed alike but there is no way to get a particular key number to match the lock number you currently have. I have linked the video on the replacement process below for you to…

view full answer...

Answer 5

If you order different styles of the Replacement Cam Lock Cylinders like the part #295-000005 that you referenced as long as you select "keyed alike" from the drop down menu that's right above the "add to…

view full answer...

Answer 6

The 1-3/4 inch length of the Replacement Cam Lock Cylinder #295-000077 refers to the threaded length of the cylinder. We also have 7/8 inch part #295-000003. 1-1/8 inch #295-000004 1-3/8 inch #295-000005

view full answer...

Answer 7

For a simple cam lock, you can get an old standard blade screwdriver that you don't care about messing up. Use a hammer and drive the screwdriver into the key slot, the further the better. Use a pipe wrench on the screwdriver handle, and…

view full answer...

Answer 8

The Global Link Keys like the one with the lock part #295-000004 are all purple. We do not carry global link keys of a different color. We do carry the 1-1/8" Camco Cam Lock for baggage doors part #CAM44363 that comes with gold colored…

view full answer...

Answer 9

The Dometic 320 Full-Timer RV Toilet #DOM87FR is 22" from the back of the toilet to the front edge of the toilet. The length from the wall will vary based on the amount of space from your center flange to the wall. You will need to add…

view full answer...

Answer 10

The Global Link RV Entry Door Locking Latch Kit #295-000019 does not have the ability to change out lock cylinders because the Replacement Lock Cylinders such as #295-000005 are not the right size and actually designed to fit baggage doors. If you…

view full answer...

Answer 11

Yes, if you select keyed alike when ordering the #295-000003 and the #295-000004 they all will be keyed alike!

view full answer...

Answer 12

The Dometic 320 Full-Timer RV Toilet #DOM87FR doesn't come with the handheld sprayer, but that can easily be ordered and installed via the Hand Sprayer Installation Kit #DOM75FR. Attached are some review videos for you to check out.

view full answer...

Will the Replacement Cam Lock Cylinder for RVs # 295-000004 Rotate 360 Degrees

Product Page this Question was Asked From

Continue Researching