TorkLift Step Options for a Truck Camper on a 2017 Ram 3500

Question

Question:

Have truck camper on 2017 Ram 3500. Need step heights for Tork Lift 5 and 6 step units. I know a 4 step is 30 tp 41 inches which is to short. I also need measurement out from camper to assure it will clear the camper bumper. Thank you

asked by: Dave B

1

Helpful Expert Reply:

We do have a couple of different options for you from TorkLift.

The TorkLift GlowStep Camper Scissor Steps # TLA7806-8000 comes with the landing gear, has a weight capacity of 350 lbs, a mounting bracket height of 49-1/2 inches, and each step is 8 inches deep which means it will extend out about 48 inches. The mounting bracket is sold separately and can be found both in Black # TLA7810 and White # TLA7820.

The TorkLift GlowStep Stow N' Go Scissor Steps # TLA7836 also comes with a White Bracket # TLA7846. This option has a 300-lb weight capacity, has a mounting bracket height of 50-3/8 inches, and extends about 48 inches.

These options will give you the most height and extend the furthest out of other options. They all also include the landing gear which can accommodate different terrain types.

expert reply by: Jon G

1

Answer 1

The main difference between the Torklift Locking FastGun Turnbuckles, #TLS9522-2-LK, and the AnchorGuard Derringer Turnbuckles, #TLS9020, is how the camper tie-downs are mounted on your truck. The FastGun #TLS9522-2-LK are designed to be used with…

view full answer...

Answer 2

To install the Replacement Anchor Bolt for HappiJac Truck #LC182852 for the HappiJac Truck-Mounted Camper Tie-Downs #LC182861 follow the instructions below and use the reference picture attached: 1. You'll start by marking a center point…

view full answer...

Answer 3

The Brophy Tailgate Scissor Step Mounting Bracket, #TSSB is not confirmed to fit with the TorkLift GlowStep Camper Scissor Steps, #TLA7503-8000. The #TSSB is however designed to work with Brophy manufactured steps of similar dimensions to the…

view full answer...

Answer 4

The weight is 40 lbs for the TorkLift GlowStep Camper Scissor Steps w/ Landing Gear - 6 Steps - 20" Wide #TLA7506-8000.

view full answer...

Answer 5

As long as you have at least 2-1/2" between your axles and the frame of your trailer when it is unloaded you should be good to go. Altogether your leaf springs should only be deflecting about 1-1/2" when carrying a load. If you…

view full answer...

Answer 6

There is one extender that will work with the 3 inch factory hitch on your 2017 Ford F-350 Super Duty, the TorkLift Cannon Hitch Extension, and it comes in three different lengths: 36" Long #TLE1636, 42" Long #TLE1642 and 48" Long…

view full answer...

Answer 7

We do offer hitch extensions for the factory 3" trailer hitch receiver on your 2017 Ford F-350 Super Duty, but there is not one that is 24" long. The shortest extension available is the TorkLift Cannon Hitch Extension - 3" Ford Super…

view full answer...

Answer 8

I checked with Torklift and they informed me that the Cannon #TLE1636 is made of 2 different tubes that overlap. One of them has a wall thickness of .25 and the other is .21. One tube fits inside of the other so the wall thickness is different at…

view full answer...

Answer 9

I spoke with my contact at Torklift and he informed me that as long as your Happijac system is the bed mount style yes, the TorkLift AnchorGuard Derringer Turnbuckles #TLS9020 would work for you. If you are using the Happijac frame style like you…

view full answer...

Answer 10

The mounting bracket for the Brophy Camper Scissor Steps #AS23 is 24 inches long and has 5 mounting holes spaced 5-1/4 inches apart. The end mounting holes are 1-1/2 inches from each side. Also, each angle is 1 inch wide. If you're looking for…

view full answer...

TorkLift Step Options for a Truck Camper on a 2017 Ram 3500

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching