Dimensions of the Lippert Components Kwikee 32 Series Double Tread Electric Step # LC372261

Question

Question:

I have a 2000 Itasca sunrise, need a complete unit. Present step by Coach Step Inc. part no 725-0001 is damaged. Step is 11 inches deep, dont know how to measure , length of support/ or top of step to bottom of step ? Unit is 24 in. wide. Would kwikee 32 LC 372261 work, unit is steel and mounting holes seem to be 8X22. Unit retracts when door is closed and has a light underneath. If LC372261 would fit, could it be possible to configure light assy from Coach Step Inc to it ? What type of connector is used, square four pin? Would appreciate any help...

asked by: PETER T

0

Expert Reply:

The Lippert Components Kwikee 32 Series Double Tread Electric Step # LC372261 that you referenced could very well work as a replacement to your current steps. As you mentioned the mounting bolt pattern is 8 x 22 inches so you will want to be sure that it is compatible. Since the steps are 24 inches wide it should fit just fine.

The steps have a 7 inch Drop/Rise and they are 9 inches Deep so they will not stick out as far as your current steps. It could be possible to mount a light assembly if you chose to, but if you have to modify the steps then the 90-day limited warranty would most likely be voided. The connector used does have 4 pins in a square design.

expert reply by: Jon G

0

Answer 1

The issue you described sounds like a faulty control module. In order to replace this you will want to use the Replacement Control Module for Lippert Electric Coach Step part #LC301702 which is a direct fit for your Lippert Steps 128980. I spoke with…

view full answer...

Answer 2

The correct replacement control module for the obsolete Lippert Coach Step 128980 double retractable step kit is part #LC301702, according to the nice folks at Lippert. If you click the provided link, you can see a video product description of the…

view full answer...

Answer 3

My contact at Lippert Components informed me that for mid-90s step motors there is a replacement motor available only for those parts that show number 5973820. If your motor shows this part number then you can use replacement motor part #LC379608. If…

view full answer...

Answer 4

We do have a solution though there isn't an exact replacement module for a 9513 unit manufactured before 1999. Instead, what you'll need to do is upgrade your steps with the Motor Upgrade Kit for Kwikee Electric RV Steps #LC379145. This will…

view full answer...

Answer 5

If your RV step's motor is dead (no operation even if you bypass the switches and directly apply 12V power to the motor terminals) then it will require replacement. Your gearbox may still be okay so long as it has not made bad noises when it last…

view full answer...

Answer 6

The Kwikee Control Box #909506000 has been discontinued by the manufacturer. The replacement part is determined by the date of manufacture which you can determine by looking at the current part which will have a date on it. If not, you can supply the…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Hey William, the E6 error on a Furrion wall thermostat indicates an Open circuit Humidity Sensor issue. Most likely the sensor is bad and needs to be replaced as this is a pretty rare error code.

view full answer...

Dimensions of the Lippert Components Kwikee 32 Series Double Tread Electric Step # LC372261

Product Page this Question was Asked From

Continue Researching