Availability of Adjustable Ball Mount With Sway Control Tab
Question:
Hello I have a 2016 Nissan Quest with a class III hitch and wired for electric brakes. I am looking for a ball mount that is adjustable as a riser and also has the plate on it for a tab sway bar mount. What would you suggest?
asked by: NATE M
Expert Reply:
There is an adjustable ball mount with a sway control tab that has rise, the Draw-Tite # 7390. The adjustable platform can be mounted to use your sway control on either the left or the right side. It has a maximum rise of 3-3/4", weight capacity of 6,000 lbs and tongue weight capacity of 600 lbs.
You will also need a pin and clip # PC3, or for an anti-rattle pin and clip, # 63232. This ball mount requires a hitch ball with a 1" diameter, so you would use # 63845 for a 2" ball or # 63847 for a 2-5/16" ball. I've added a link to a video review of this ball mount for you to take a look at as well.
Products Referenced in This Question
Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches - 3-1/2" Span
- Trailer Hitch Lock
- Universal Anti-Rattle Lock
- Keyed Unique
- Fits 2 Inch Hitch
- Spring-Loaded Pin
- 3-1/2 Inch Span
- Lets Go Aero
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
2-5/16" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Draw-Tite
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 4 Inch Span
- Draw-Tite
more information >
Product Page this Question was Asked From
Ball Mount Adjustable with Sway-Control Tab, 6,000 lbs
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 5 Inch
- Rise - 4 Inch
- Fits 2 Inch Hitch
- 6000 lbs GTW
- Class III
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Charge a Trailer Battery While Driving: 3 Common Problems (And How to Fix Them)
- Q&A: 2002 Mercury Mountaineer Brake Controller Port Location and Install Harness
- Q&A: No 12V Power to Brake Controller on a 2001 Ford F-250
- Q&A: What is Maximum Rise of the B&W Tow & Stow 2-Ball Mount # BWTS10035B
- Q&A: Recommended Lift Kit for a 2021 GD Reflection 295 RL 5th Wheel Trailer
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Q&A: What is Minimum Air Pressure for Curt Flex Air Pin Box
- Q&A: Does Curt RockerBall C94CR Have More Cushion Than Curt RockerBall C40047
- Q&A: Troubleshooting Horse Trailer Interior Lights Not Functioning
- Article: Steel vs. Aluminum Ball Mounts
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: 5 Things to Know About Weight Distribution Hitches