How to Tell Which Wheel Tray Holder of a Yakima Two Timer or Four Timer Needs Replacing

Question

Question:

I lost two of my trays because I didnt tighten them down but Im not sure if I need to buy an A tray or B tray. How do I tell? Thanks!

asked by: Annie

0

Expert Reply:

I attached a picture that shows a TwoTimer labeled with what each of the wheel holder types is.

For an A holder you'd need the # 8880796 or for a B you'd need the part # 8880797.

expert reply by: Jameson C

0

click to enlarge

Answer 1

It sounds like you are looking for the Replacement "B" Wheel Tray Assembly for Yakima TwoTimer and FourTimer Bike Racks #8880797, for your Yakima TwoTimer Bike Rack. This product replaces a wheel tray assembly "B"…

view full answer...

Answer 2

According to Yakima, the difference between the Replacement "A" Wheel Tray Assembly #8880796 and Replacement "B" Wheel Tray Assembly #8880797 is the following: "Look at the base of the wheel cup and look at the cut out above…

view full answer...

Answer 3

We have the wheel mounting hardware #8880520 for the Yakima TwoTimer. The wheel tray has been replaced with #8880796 which is what you'd need.

view full answer...

Answer 4

Unfortunately the tongue of your Yakima Two-Timer is different from your Yakima Hold-Up 2, so they cannot be interchanged. I have included pictures below that show the difference. Your best option is two get the Yakima HoldUp EVO bike rack, part…

view full answer...

Answer 5

A hi-low adapter like the part #RM-048-6 you mentioned is designed for a rolling load like a vehicle being flat towed behind a motorhome. Although it hasn't been designed for a hitch mounted accessory like a bike rack, it can be used for that…

view full answer...

Answer 6

Racks of this type depend on having direct contact with the bike tires, and if a fender is in the way the bike won't be secure. According to Inno, it will depend on the style of bike and how far down the wheels the fender goes. On mountain bikes…

view full answer...

Answer 7

For the Yakima TwoTimer we don't have a wider wheel cradle to allow it to fit better with fat bikes but we do have a longer strap that allows the fat tires to secure better with part #Y02470. The wheel cradle you referenced would not be wider…

view full answer...

Answer 8

I'd be happy to help out! The way to choose correctly between the Replacement "A" #8880796 and "B" #8880797 trays for your Yakima FourTimer is how many bumps you'll find at the base of the wheel cup "(or tray). Our…

view full answer...

Answer 9

A very popular bike rack to use with the Rack and Roll trailer like part #Y08107 is the Frontloader part #Y02103 which allows you to keep the front wheel on the bike as your travel. This rack is very highly rated with our customers so it would be a…

view full answer...

Answer 10

You can actually use the Replacement Extra Long Wheel Strap #Y8880229 for your Yakima FourTimer #Y02469. The Fat Strap #Y02470 is 16" long and the Extra Long part #Y8880229 that I referenced is 12-1/4" long and can accommodate up to…

view full answer...

Answer 11

We do have the A replacement Yakima TwoTimer bike rack with the part #8880796.

view full answer...

How to Tell Which Wheel Tray Holder of a Yakima Two Timer or Four Timer Needs Replacing

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching