12V LED Lights for Inside a Cargo Trailer

Question

Question:

Greetings, Wish to install 12 volt, led lights inside a cargo trailer that I can replace the lights in if need be, i.e. not hard wired into the light fixture, but will be able to pull the light out of the socket and put a new one in. Respectfully

asked by: Gary P

0

Expert Reply:

There are many 12V LED lights which are available for the inside of a cargo trailer. The thing about LED lights, however, is that you are never going to have to pull a light out of the socket and replace it with a new one. For example, the Optronics # RVILL34 is a surface-mounted LED light with 18 diodes, which is what provides the light. They last very long with just 0.6 amps of power draw and a lifetime warranty for the lights. You can see how bright the lights are by the photo I've added. I've also attached a link to a video review for you to take a look at.

Other lights you may be interested in are the Opti-Brite LED Interior Light # ILL08COB, LED Interior Trailer Dome Light # ILL39CB and Opti-Brite RV Interior Strip Light # ILL70CBSBAWN. I've added a link to our page with each of our 12V LED lights for you as well.

expert reply by: Kyle S

0

click to enlarge

Answer 1

The Replacement Pivot Arm "A" #BW3035A you found will fit on either the left or right hand side of your B&W Companion Base #BWRVB3500. You will need a Replacement Pivot Arm "B" #BW3035B for the opposite side of the…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

Hello Brad, we have exactly what you are looking for! You can use the Curt Adapter Rails #C88KR. This will attach directly to the OEM puck system (the 5 pockets) in the bed of your 2024 Chevy, and it will give you the industry standard rails you can…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Yes, because it is a 3-wire light, you can wire the Red Identification Light Bar with White LED Utility Light #OPT88FR to function as rear marker and reverse lights.

view full answer...

Answer 6

For the Tecnic 45 degree accent light part #TN42FR the correct mounting cover is the part #TN34FR.

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

In order to wire your cargo trailer for both 12 volt DC and 110 volt AC power you would need to install a AC/DC distribution panel and power converter which we currently do not offer. You would then wire the 12 volt power to the converter along with…

view full answer...

12V LED Lights for Inside a Cargo Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching