Westin HDX Grille Guard with Punch Plate for a 2007 GMC Sierra 1500 New Body Style

Question

Question:

Will this grille guard fit on an 07 GMC Sierra Denali be body style?

asked by: Nick

0

Expert Reply:

The Westin HDX grille guard # 57-2295 is designed to fit the 2007 GMC Sierra 1500 new body style as well as 2008 to 2013 models. It is not a fit for a 2007 Classic (old body style which would look like a 2006). Other than that there are no exclusions listed for this grill guard.

expert reply by: Michael H

0

click to enlarge

Answer 1

The Westin HDX Headache Rack part #57-8025 that you plan to install on your 2008 GMC Sierra installs by attaching to the top of your bed rails. Since the TruXedo Deuce 2 Soft Tonneau Cover #TX770601 that you are interested in installs on the inside…

view full answer...

Answer 2

For your 2014 Chevy Silverado you would want the Westin Headache Rack part #57-8025 as it attaches through the top of your bed rails which will allow a tonneau cover to install. If you have a 5-1/2 ft bed you would want the Deuce part #TX771801 If…

view full answer...

Answer 3

I do have a headache rack and toolbox that will work with one another on your 2014 GMC Sierra 1500 but the MaxxTow MaxxHaul Heavy Duty Headache Rack MT70234 is not confirmed to work with crossover style tool boxes. The only toolbox that would be…

view full answer...

Answer 4

The mounting brackets you need are part #57-229PK. They're specifically for the Westin HDX grille guard, part #57-2295 on your 2010 GMC Sierra 1500.

view full answer...

Answer 5

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 6

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 7

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 8

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 9

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Westin HDX Grille Guard with Punch Plate for a 2007 GMC Sierra 1500 New Body Style

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching