Finding the Cold Side of the Stop Light Switch on a 2017 Toyota Highlander
Question:
Is there any way to hook up to the hot side of a brake switch without going under the dash to get it? Maybe in the back compartment? Thanks
asked by: Don
Expert Reply:
I believe that you are trying to connect to the cold side of the brake light switch. The hot side wouldn't do you any good, but the cold side is what you would connect a brake controller like the Tekonsha Prodigy P2 # 90885 to.
Your best bet is to locate the cold side of the stop light switch under your driver side dash but using a Circuit Tester # PTW2993. The cold side of your switch is the wire that only gets hot when the brake pedal is pressed. If you look at the attached video starting at the 20:50 mark you will see one of our install team members finding the stop light switch on a 2015 Toyota Highlander. It might not be the exact same color as the wiring on your 2017 Highlander, but it should be in a fairly similar location. You will want to still test the functions with a tester.
If you are still having trouble locating it, you can try to trace the wire from your third brake light which gets its connection from the stop light switch at all. Since a brake controller requires more power than your third taillight it will do you no good to splice into that wiring.
Products Referenced in This Question
Product Page this Question was Asked From
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Bumpers
- Shop: Curt Assure Trailer Brake Controller with Adjustable Screen - 1 to 4 Axles - Proportional
- Q&A: Brake Controller and Wiring Harness for a 2022 Toyota Highlander
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Search Results: 21002
- Shop: Demco Stay-IN-Play Duo Braking System for RVs w/ Hydraulic Brakes - Wireless Monitor - Proportional
- Shop: Vehicle Tow Bar Brake System
- Search Results: 9599018
- Shop: Redarc Tow-Pro Liberty Brake Controller - Dash Knob - 1 to 2 Axles - Proportional
- Shop: Thule Passage Trunk Bike Rack for 2 Bikes - Hanging Style
- Shop: Trunk Bike Rack
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Video: Redarc Tow-Pro Liberty Brake Controller Installation - 2019 Toyota Highlander
- Video: Redarc Tow-Pro Liberty Brake Controller Installation - 2013 Toyota Highlander
- Search Results: inverter
- Video: Redarc Tow-Pro Elite Trailer Brake Controller Installation - 2018 Toyota Highlander
- Shop: Trailer Hitch
- Q&A: Where to Hook Up Red Wire for Redarc Brake Controller on 2017 Toyota Highlander
- Q&A: Can Brake Controller Install in 2018 Toyota Highlander
- Search Results: 7 blade wire tester
- Search Results: trailer brake controller
- Video: Trailer Brake Controller Installation Wiring Kit Review
- Video: Trailer Wiring Harness Installation - 2018 Toyota Highlander 118449
- Search Results: etbc7
- Search Results: trailer wheel