Recommended Roller Bunks For Tri-hull of Restored 1974 AMF Crestliner Muskee
Question:
I have a restored 1974 AMF Crestliner Muskgee , the trailer basically stinks, I am a Retired Army Disabled Vet, 62 with Parkinson. I cant self load my boat with current set up . can I replace with this setup.. Dutton-Lainson Boat Trailer Deluxe Roller Bunk - 5foot Long Sections - 12 Sets of 3 Rollers - DL21741 the boat is a tri hull 17 ft
asked by: Daniel L
Expert Reply:
Thank you for your service.
For your 1974 AMF Crestliner Muskie, from what I can find online is a nice boat that will work really well with roller bunks on the trailer. I recommend the Dutton-Lainson Boat Trailer Deluxe Roller Bunk - 5' Long Sections - 12 Sets of 3 Rollers # DL21741 you mentioned. This will allow you to launch easily. You will want to make sure you have a rope to hold onto your boat as I've heard of people being ill prepared for such an easy launch compared to bunk boards and their boat launched without them.
I recommend using the Boat Trailer Roller Bunk Bracket for Dutton-Lainson Roller Bunks Parts DL21740 & DL21741 # DL21742 along with the CE Smith U-Bolt - Galvanized - 3-13/16" Long x 3-1/16" Wide x 1/2" Diameter - Qty 1 # CE15283GA to install these bunks. If you need a different size u-bolt let me know and I'll see what will work best for your frame dimensions.
Products Referenced in This Question
CE Smith U-Bolt - Galvanized - 3-13/16" Long x 3-1/16" Wide x 1/2" Diameter - Qty 1
- Boat Trailer Parts
- U-Bolts
- 3-1/16 Inch Wide
- 1/2 Inch Diameter
- Galvanized Steel
- 3-13/16 Inch Long
- CE Smith
more information >
Boat Trailer Roller Bunk Bracket for Dutton-Lainson Roller Bunks Parts DL21740 & DL21741
- Boat Trailer Parts
- Bunks
- Rollers
- Roller Bunk Bracket
- Zinc-Plated Steel
- Dutton-Lainson
more information >
Product Page this Question was Asked From
Dutton-Lainson Boat Trailer Deluxe Roller Bunk - 5' Long Sections - 12 Sets of 3 Rollers
- Boat Trailer Parts
- Bunks
- Rollers
- Roller Bunk
- Black Rubber
- Dutton-Lainson
more information >
Continue Researching
- Q&A: Replacement Oil Cap for Dexter Hub # 21-35
- Q&A: Window Cover Recommendation for Class C Motorhome Built on F-550
- Q&A: What Size Hardware Should Be Used With the Super Titan Forged Pintle Hook Plate
- Q&A: Will the Pintle Hook # 63015 Attach to the Super Titan Pintle Hook Plate # RP38186
- Q&A: How to Determine if Trailer Axle is Not Aligned and How to Measure to Replace Trailer Axle
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: Recommended Replacement Grease Seal and Braking Assemblies for an AL-KO 7210
- Q&A: Size of U-Bolt Slots in Dutton-Lainson # DL21742 Roller Bunk Bracket for Roller Bunks DL21740/41
- Article: Trailer Lighting Requirements
- Article: Boat Trailer Showdown: Bunks vs. Rollers
- Article: Trailer Wiring Diagrams
- Article: Best Ladder Racks
- Article: How to Bleed Your Trailer Surge Brakes
- Article: RV Cell Boosters, How Do They Work?