How to Find Stoplight Circuit Switch in 2012 GMC Terrain for Installing Brake Controller
Question:
Looking for color code of wire on brake pedal switch to wire in brake control
asked by: Jim K
0
Expert Reply:
We haven't had the chance to install a brake controller in a 2012 GMC Terrain like what you have but what you'll have to do is use a circuit tester like part # PTW2993 to test the wires that feed into the brake pedal switch and use the wire that only sees voltage when the brakes are applied.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Troubleshooting Brake Controller Installations
- Q&A: How to Test Brake Controller without Trailer Connected
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Trailer Turn Signals Both Blink when Just Left Turn Signal is Activated
- Q&A: Trailer Lights Left Side Turn Signal and Brake Lights Not Working
- Q&A: Troubleshooting No Running Lights on Trailer but Turn Signals and Brake Lights Work
- Q&A: Checking Trailer Lights Without Hooking Up to Vehicle?
- Q&A: Can the Curt Custom Tail Light Wiring Kit Be Used With LED Lights