Brake Controller and Wiring Adapter for a 1999 Ford F-250

Question:

I have a 1999 F-250 turbo diesel. I want to pull trailers with electric brakes. Does the truck come with a built in brake controller? I suspect it doesnt and there is none installed aftermarketas far as I can tell. What is a good brake controller setup controller, wiring harness,etc. for this application. I need it to control 2 6000# axles each with brakes. The truck has a 4 pin straight plug and a 6 pin round plug on it. I want the proportional brake controller not the time delay.

asked by: Mike

Expert Reply:

I can strongly recommend the Tekonsha P3 brake controller, # 90195, for your F-250. It is one of our best sellers, mainly because of it's easy installation and set-up, and it is able to handle many different types of trailer setups.

You will also need the Tekonsha Wire Replacement for Ford Trucks, # 3035-P, one end of the adapter would plug into the under dash port, and the other end into the back of the controller.

expert reply by: Mike L