Weight Distribution System Recommendation for 1999 Chevy Suburban Towing Car Hauler

Question:

Hello I have a 99 Suburban half ton when I tell my race car on a 18ft trailer my rear end sacks a little bit Im wondering roll airbags or your is eating system I can add make it not sag that bad

asked by: John S

Expert Reply:

For your application a weight distribution system will be your best option. This reduces sag by moving some of the tongue weight from the trailer up to the front axle of the tow vehicle. So not only does this reduce sag it also helps improve handling and braking while towing.

The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use.

Once you know your tongue weight you will want to check out the link I attached that has all of the weight distribution systems we carry. You will be able to select your tongue weight from the filters to see what would be rated for your setup. Or you can email me back and I'll make a recommendation

Considering the weight capacity of your vehicle most likely best option is the part # RP66084 though. This has a tongue weight range of 600-1,200 lbs and features only sway control that works to fight sway before it starts.

For a 2 inch ball you would want part # A-90 and for a 2-5/16 inch ball # 19286.