Having a Difficult Time Removing the Head of my Reese 16K 5th Wheel Hitch to Replace the Spring
Question:
Removing head to replace spring and lubricate parts. How do I do this? ??Pull small pin and pound out large pin in rocker arm pin?? OR???. I tried this but couldnt get the large pin to budge. ??Bigger hammer?? And, which parts do I lube with spray lithium grease? Thanks,
asked by: Jean M
Expert Reply:
I spoke with my contact at Reese and he said that sometimes the pins can get lodged in the head and make it difficult to remove. He said that using a hammer to help get the pin out is necessary sometimes and would most likely work for you.
He also said that any moving parts that you can access will benefit from being lubricated with lithium grease.
If you need a replacement spring I would recommend a Replacement Spring for Reese and Draw-Tite Fifth Wheel Hitches, part # 30776.
Product Page this Question was Asked From
Replacement Crossmember Head Support for Reese 5th Wheel Trailer Hitch - 16,000 lbs
- Accessories and Parts
- Fifth Wheel Hitch
- Head
- Head Support
- Reese
more information >
Continue Researching
- Shop: Fifth Wheel Hitch
- Shop: Reese Quick-Install Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches
- Shop: Reese 5th Wheel Trailer Hitch - Dual Jaw - 16,000 lbs
- Video: Reese Fifth Wheel - Fixed Fifth Wheel - RP30047 Review
- Video: Choosing the Right Trailer Wiring
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Article: Trailer Wiring Diagrams
- Shop: B&W Patriot 5th Wheel Trailer Hitch w/ Slider - Dual Jaw - 18,000 lbs
- Shop: Trailer Hitch
- Search Results: 44649
- Video: Choosing the Best Fifth Wheel Hitch
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Shop: Grease Seals 10-36 (pair)
- Shop: Trailer Wiring
- Search Results: 68149
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Gooseneck Hitch
- Video: Lippert Solera Slider Slide-Topper Review
- Q&A: 2022 Toyota Highlander Wiring for a 7-Way Blade Connector
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 25580
- Shop: Dust Cap for Kodiak Disc Brake Kit
- Video: Choosing the Right Brake Controller
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Shop: Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Search Results: dust cap
- Shop: Brake Controller
- Video: Roadmaster Automatic Battery Disconnect Installation - 2020 GMC Sierra 1500
- Shop: Suspension Enhancement