Is Replacement Socket EQ90-03-1200 Made by Equal-I-Zer

Question

Question:

Is your part EQ90-03-1200 manufactured by Equal-i-zer, or is it made by an after market manufacturer?

asked by: Charles R

0

Expert Reply:

Yes, the part # EQ90-03-1200 that you referenced is made by the company Equal-I-Zer.

expert reply by: Jameson C

0

Answer 1

Equal-I-zer doesn't offer a full kit for an 8 inch frame, but we can provide the parts you need. If you have an existing kit, and you're wanting a complete kit to use your system on a second trailer, you'll need: 2 of #EQ90-02-5378 Outer…

view full answer...

Answer 2

The benefits of an Equal-I-zer hitch over the e2 is primarily the improved 4-point sway control of the Equal-I-zer. The 4-point sway control utilizes steel on steel friction at the arms as well as in the hitch head to stop sway. The e2's 2-point…

view full answer...

Answer 3

In order to use a Equal-i-zer Weight Distribution System like part #EQ37121ET on an 8" tall trailer frame you'll need two Outer Link Plates part #EQ90-02-5378 and two Inner Link Plates part #EQ90-02-5208.

view full answer...

Answer 4

The Equal-i-zer Weight Distribution System part #EQ64FR comes with a 2-1/2" shank and has a 1,6000 lb tongue weight rating. It is widely known as one of the best weight distribution systems on the market. It can be used with an 8" tall…

view full answer...

Answer 5

The first thing you will need to check is if there is enough space around the existing tires to use the larger size. Based on the old size you have, 235/75-15 (which isn't a common trailer tire size) the tires are approximately 28.8 inches tall…

view full answer...

Answer 6

Yes, you could use a wheel as a spare that has a 15 inch diameter even though the rest of the wheels on your trailer are 16 inches in diameter. The measurement that you will want to be the most aware of is the outside diameter of the tire that you…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

Since both a ST145/R12 size tire, like the Kenda Karrier S-Trail #AM10130, and a 5.30-12 size tire, like the Kenda K353 #AM10068, fit a 12 inch wheel, a ST145/R12 size tire can replace a 5.30-12 size tire. Keep in mind that these tires do have…

view full answer...

Answer 11

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

Answer 12

The Tru Ryde grease seals you mentioned, part #RG06-70 are indeed a replacement for the 10-036-00 Dexter seals. They would work great for your application.

view full answer...

Is Replacement Socket EQ90-03-1200 Made by Equal-I-Zer

Product Page this Question was Asked From

Continue Researching