Hitch and Bike Rack Recommendation for a 2006 Acura MDX
Question:
I want to be sure that when I have a trailer hitch installed, that the full sized spare that is on the MDX will fit and be accessible. My immediate goal is to place a 4 bike rack on the hitch, and then long term I want to place a small light-weight trailer for carrying bulky items furniture, luggage, etc, household items
asked by: Joe G
Expert Reply:
For your 2006 Acura MDX I recommend the Draw-Tite Trailer Hitch, part # 75599. I attached installation instructions as well as an installation video for you to check out below for this product.
You will not need to remove your spare to install this hitch and it can remain installed on your MDX while you have the hitch installed.
For a 4 bike rack I recommend you get a Thule Camber 4 Bike Carrier, part # TH9056.
If you plan on hauling womens or alternative framed bikes you would be interested in purchasing a Thule Womens and Alternative Frame Bike Adapter Bar, part # TH982. I attached a review video for this product below for you to check out also.
You may need the following items to complete your towing setup:
Ball Mount 3/4 inch Rise or 2 inch Drop, part # AMSC2
Pin and Clip, part # PC3
Hitch Ball with 2 inch Diameter and Medium Shank, part # 19247
Hitch Ball with 1-7/8 inch Diameter and Medium Shank, part # 19260
Products Referenced in This Question
1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 2000 lbs GTW
- Class III
- Draw-Tite
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Concealed Cross Tube
- Draw-Tite
more information >
Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Matte Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- Class IV
- Shock Absorbing
- Convert-A-Ball
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 4 Inch Span
- Draw-Tite
more information >
Thule Camber Bike Rack for 4 Bikes - 1-1/4" and 2" Hitches - Tilting
- Hitch Bike Racks
- Hanging Rack
- Folding Rack
- Tilt-Away Rack
- Frame Mount
- Locks Not Included
- 4 Bikes
- Class 2
- Class 3
- Fits 1-1/4 Inch Hitch
- Fits 2 Inch Hitch
- Fits 1-1/4 and 2 Inch Hitch
- Thule
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Towing Capacity of 2005 Honda Pilot and Parts Needed to Tow Trailer
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Parts Needed to Tow a Trailer with a 2007 Honda Pilot
- Q&A: Trailer Hitch Recommendation for 2003 Honda Pilot
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Trailer Hitch for a 2006 Honda Pilot w/ Full Size Spare
- Q&A: Hardware for Curt Class III Trailer Hitch Receiver # 13328 to fit a 2005 Honda Pilot
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Does a Short Bed Truck Need a Slider if the Trailer has Max Turn Technology
- Q&A: New Trailer Hitch Is Touching Exhaust On 2005 Acura MDX
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Rolling on a Budget: Top Wallet-Friendly Platform Bike Racks