Does RhinoFLEX Rhino Blaster Adapter CAM39080 Fit RhinoEXTREME Sewer Hoses

Question

Question:

Will this elbow work with the RhinoEXTREME Sewer hoses?

asked by: Ricky

1

Helpful Expert Reply:

RhinoFLEX Rhino Blaster Adapter for Rinsing RV Holding Tanks and Sewer Hoses Item # CAM39080 does work with the RhinoEXTREME sewer hoses such as # CAM39867 or any of the others with bayonet fittings.

expert reply by: Michael H

1

Answer 1

When fully compressed each of the hoses that come with the RhinoEXTREME #CAM39867 will measure 54 inches minus the elbow as that wouldn't fit in a RV bumper.

view full answer...

Answer 2

The swivel fittings on the ends of RhinoEXTREME RV Sewer Hoses #CAM39867 are not meant to be removed. If you are concerned about storage most hose storage systems are more than large enough to accommodate the fittings.

view full answer...

Answer 3

I do have a sewer hose storage container that will work with the RhinoEXTREME RV Sewer Hoses part #CAM39867 but the bayonet fittings on the end of this hose are not removable and measure to be 4-1/2" in diameter. Therefore, this hose will not…

view full answer...

Answer 4

The RhinoEXTREME RV Sewer Hoses w Swivel Fittings #CAM39867 referenced in your question include two 10 foot long hoses, along with swivel bayonet, lug, elbow fittings, a 4-in-1 adapter and storage caps. These hoses will compress to allow for easy…

view full answer...

Answer 5

If you want to get the bars more parallel with the frame I recommend dropping the bracket down one hole and tilting the weight distribution head towards the trailer to even them out a bit more. Although from the photos of the Equal-I-Zer system part…

view full answer...

Answer 6

A weight distribution system like the Equalizer #EQ37100ET can be secured to the hitch on your vehicle by using a hitch lock such as #e98880. This will lock the shank portion to the receiver. However, there is no lock system designed to secure a WD…

view full answer...

Answer 7

Scissor jacks on trailers can be used as levelers or stabilizers. They are just not meant to lift up the weight of the trailer so that would limit the amount of leveling they can do. I recommend also using leveling blocks #UF48-979051, or the ones…

view full answer...

Answer 8

Each of the leaves on the Leaf Spring #e47SR are 3/8" so this will give the spring pack a height of 1-1/2". Here is a list of our U-Bolt Kits for a 3" axle. Redline #APUBR-9 Dexter #APUBR-8 CE Smith #CE23003

view full answer...

Does RhinoFLEX Rhino Blaster Adapter CAM39080 Fit RhinoEXTREME Sewer Hoses

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching