Replacement Keys Needed for SportRack Bike Rack Lock Y016

Question

Question:

Hi, We lost our keys to the lock on a sportrack bike rack and are looking to replace them. We are located in Canada. Not sure which keys are the right ones. Could you help us? On the lock the number is Y016. Its a hitch bike rack for 3 bikes. Ive attached a picture for your reference. We want to purchase replacement leya but arent sure which ones would work with this lock. Thanks,

asked by: Oriana

0

Expert Reply:

The lock number Y016 that you said is on your SportRack Bike Carrier is prior to Thule acquiring SportRack. My contact at Thule said that they unfortunately do not have any keys or lock cores that will work or replace your older bike rack. Unfortunately we won't be able to help you on that end, you will need to try to find a vendor that might sell older bike racks and check with them.

I recommend getting the newer version of your bike rack which would be the SportRack Pathway # SR2703. Going with a newer bike rack will enable you to purchase new replacement keys or lock cores from Thule should the need arise.

expert reply by: Jon G

0

click to enlarge

Answer 1

Yes, we can ship the Replacement Lock Core and Key for SportRack Explorer Cargo Box part #SR03807 to Canada. You can proceed to checkout on the order screen once you are done and it will allow you to enter an address located in Canada. Please note…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 5

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 8

There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…

view full answer...

Answer 9

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

The best solution is to purchase the Swagman Bike Frame Adapter Bar for Electric, Step Through, and Cruiser Bikes #S57FR for the non-electric women's bike and any electric bike that has a step-through or alternative frame. The adapter bar will…

view full answer...

Answer 12

As long as the flat tow wiring is wired in before the 4-Way #C93ZV and you connect the power for the converter directly to the battery it will work. I have seen several use Magnetic Lights #TL21RK which they will wire in on the main harness to have…

view full answer...

Replacement Keys Needed for SportRack Bike Rack Lock Y016

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching