How To Lower The Exhaust Pipes For A Trailer Hitch Install On A 2013 Toyota Sienna
Question:
when installing this trailer hitch receiver , the exhaust pipe is in the way. how do i move the exhaust pipe??
asked by: Peter C
Expert Reply:
In order to install the Curt Trailer Hitch Receiver part # C13105 on your 2013 Toyota Sienna, you will first need to lower the exhaust pipes from the rear of the vehicle. To do this, you will need a can of spray lubricant such as WD40 or PB Blaster in addition to either a large pry bar or exhaust hanger removal tool. The rear exhaust pipes are attached to the frame by a metal exhaust hanger and a rubber isolator. The isolators are located underneath the vehicle just behind the rear mud flaps. I have attached a photo of a rubber isolator and metal exhaust hanger for you.
There are two isolators in which you will need to remove in order to install the hitch. You will want begin by applying a small amount of lubricant to each of the rubber isolators. You can then use either the pry bar or exhaust hanger removal tool to release the hanger from the bottom portion of the isolator. Once released, you will need to do the same to the other side. It is always a good ideal to use a support strap to rest the exhaust pipes on while lowered, in order to prevent damage to the exhaust system. Once the exhaust pipes are removed from the rubber isolator, you can then install the hitch receiver.
The exhaust location will different for every vehicle even within the same manufacturer as they are not placed in an exact location among every vehicle from factory. This will in turn, cause installation difficulties across various platforms while installing a hitch receiver.
It may also be necessary to bend the exhaust hangers if you find that the exhaust pipes are making contact with the hitch receiver. If this is necessary, you will want to apply a small amount of heat to the exhaust hangers while gently prying them away from the hitch receiver.
I have also attach an installation video of this hitch on a similar year 2014 Toyota Sienna that will show you how this is done, you can fast forward to the 1:29 mark in the video to see the exhaust hanger removal.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Video: etrailer Class III Trailer Hitch Installation - 2021 Subaru Forester
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Video: Curt Class III Trailer Hitch Installation - 2022 Subaru Forester
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: EcoHitch Hidden Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: RV Bike Racks
- Search Results: 814092
- Q&A: Difference Between Curt and etrailer Trailer Hitch Receivers for 2020 Chevy Colorado
- Shop: Trailer Wiring
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Video: Fastenal Tools - Hitch Tools - 814092 Review
- Shop: Kuat Piston Pro Bike Rack for 3 Bikes - 2" Hitches - Wheel Mount
- Article: Trailer Hitch Installation Tips
- Video: etrailer Trailer Hitch Installation - 2020 Mazda CX-5
- Shop: Nylon Tube Brush - 1/2"
- Q&A: Does Exhaust Need to be Lowered to Install Any Trailer Hitch on a 2019 Chevy Equinox
- Video: Fastenal Nylon Tube Brush Review 814092
- Video: etrailer.com Trailer Hitch Installation - 2006 Toyota Sienna
- Video: Trailer Hitch Installation - 2006 Toyota Sienna - Draw-Tite
- Q&A: Does etrailer Hitch Require Trimming Rear Bumper for Install on 2020 Mazda CX-5
- Q&A: Installation Instructions for etrailer Trailer Hitch Receiver for 2019 Toyota Sienna
- Search Results: 1 1 4 to 2 hitch adapter
- Search Results: towbar adapter
- Search Results: 6 bike hitch rack
- Search Results: bike rack
- Q&A: Grease Seal Recommendation to Replace TCM 21334
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What is the Difference Between a Class II and a Class III Hitch?